upgrading LCD on a t60p

T60/T61 series specific matters only
Post Reply
Message
Author
thatcrazycommie
Freshman Member
Posts: 52
Joined: Tue Jun 05, 2007 10:27 am
Location: Boston, MA

upgrading LCD on a t60p

#1 Post by thatcrazycommie » Sun Nov 23, 2008 8:37 pm

I love my widesceen t60p, but its weakest feature, I think, is the LCD. The resolution is fine, but there are annoying dark spots, it could be brighter, and the viewing angles are not great.

So, I was wondering if anyone can explain what I'd have to go through to upgrade to a better one. Who sells them, where can I order one, is it possible/easy to replace myself, or would I have to bring it to a shop?

Much thanks!

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15739
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

#2 Post by ajkula66 » Sun Nov 23, 2008 10:07 pm

I don't see that you have much of an upgrade option with a WS version of T60p...unfortunately, they're all pretty much the same junk...

There were only two type of panels offered on these machines, Samsung and LG, the latter being slightly less horrible than the former, and the FRU for LG LCD is 42T0327 .

As for information on "how to", you'll get quite a good idea from this thread:

http://forum.thinkpads.com/viewtopic.php?t=69563 and from HMM:

http://www-307.ibm.com/pc/support/site. ... MIGR-66958

Hope this helps.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: T61p

PMs requesting personal tech support will be ignored.

yak
ThinkPadder
ThinkPadder
Posts: 1256
Joined: Thu Dec 06, 2007 3:17 pm
Location: NRW, Germany

#3 Post by yak » Mon Nov 24, 2008 7:17 pm

Before you go hunting for an LCD based on the T61 thread above, know that LCDs in T60 have a special Lenovo "mark" in the EDID memory. This means that you can only use LCDs made by Lenovo (the Samsung and LG mentioned above) or you will have to get an EEPROM programmer hardware and program the EDID of a non-Lenovo LCD. Additionally it may be quite difficult to get the right EDID contents to program.

AFAIK, this limitation was removed in T61.

You will find more info in the sticky thread (LCDs on T60/T60p). Especially this post by Troels:
http://forum.thinkpads.com/viewtopic.ph ... 315#388315
ThinkPad™ X201 / AFFS-120
i5-560M 2.67Ghz, 8GB RAM, Samsung 840 Pro 256GB SSD, Win 8 Pro 64-bit, UltraBase X200, ThinkPad Compact USB Keyboard,
Dell U2713HM (2560x1440, IPS), ExpressCard USB 3.0 (2 ports, flush), Nexus 7+10

crashnburn
ThinkPadder
ThinkPadder
Posts: 1643
Joined: Sat Apr 22, 2006 4:26 pm
Location: TX, USA & Bombay, India

#4 Post by crashnburn » Wed Nov 26, 2008 2:55 am

Interesting Yak. I'd love to see if its possible to get that Sharp 14" UXGA loaded onto replace the LCD on a 14" SXGA+ T61.
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 4 guests