I want to wipe my laptop clean
-
kingman99
- Sophomore Member
- Posts: 228
- Joined: Wed Mar 14, 2007 6:02 pm
- Location: Morganville, New Jersey
I want to wipe my laptop clean
Hi
I have nothing on this laptop that l cannot use so l want to wipe it clean and reinstall my O/S
Windows 2000 pro 600X
I must have preoblems with everything and it's my fault for lurking in the wrong places.
Also when l was installing a Belkin wireless G Plus Mimo USB
adapter to use on my wifes secured network it asked me for an
Encryption code. where do l find this?
Thanks
Alan
I have nothing on this laptop that l cannot use so l want to wipe it clean and reinstall my O/S
Windows 2000 pro 600X
I must have preoblems with everything and it's my fault for lurking in the wrong places.
Also when l was installing a Belkin wireless G Plus Mimo USB
adapter to use on my wifes secured network it asked me for an
Encryption code. where do l find this?
Thanks
Alan
-
RealBlackStuff
- Admin
- Posts: 17517
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
If you have a self-booting W2K CD, put it in, then when asked where/how to install it, delete all existing partition(s), make (a) new one(s), format, and continue install.
Could the encryption code be the password?
Could the encryption code be the password?
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
-
kingman99
- Sophomore Member
- Posts: 228
- Joined: Wed Mar 14, 2007 6:02 pm
- Location: Morganville, New Jersey
Encryption Code
When my wife bought the Belkin at Best Buy they had a deal for a free Geek Squad install and before he left he gave my wife a slip with a 26 encryption code.
When l tried it zippo
When l tried it zippo
-
RealBlackStuff
- Admin
- Posts: 17517
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
Did it work after the installation by geek squad?
Can you see the current encryption code in cleartext somewhere?
Perhaps in the Registry?
Have you looked at this?
http://www.belkin.com/support/product/? ... id=F5D9050
Can you see the current encryption code in cleartext somewhere?
Perhaps in the Registry?
Have you looked at this?
http://www.belkin.com/support/product/? ... id=F5D9050
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
-
kingman99
- Sophomore Member
- Posts: 228
- Joined: Wed Mar 14, 2007 6:02 pm
- Location: Morganville, New Jersey
Hi
When they left it was perfect for my wifes T-61.
I would like to wipe my hard drive clean to get rid of unwanted whatevers.
I have a wind 2000 pro cd and used it before when l had to reploace my hard drives. They only seem to last 2yrs before l replace them>
They are cheap to replace on Ebay
This time l would rather just wipe everything including ????
Thanks
Alan
When they left it was perfect for my wifes T-61.
I would like to wipe my hard drive clean to get rid of unwanted whatevers.
I have a wind 2000 pro cd and used it before when l had to reploace my hard drives. They only seem to last 2yrs before l replace them>
They are cheap to replace on Ebay
This time l would rather just wipe everything including ????
Thanks
Alan
-
RealBlackStuff
- Admin
- Posts: 17517
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
Guess your text was not too clear...
1) you want to wipe and reinstall W2K on a 600X.
2) you have problems with the wife's T61 Belkin adapter.
(3) OR: you have problems with installing the Belkin on the 600x?)
Right?
1) you want to wipe and reinstall W2K on a 600X.
2) you have problems with the wife's T61 Belkin adapter.
(3) OR: you have problems with installing the Belkin on the 600x?)
Right?
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
-
kingman99
- Sophomore Member
- Posts: 228
- Joined: Wed Mar 14, 2007 6:02 pm
- Location: Morganville, New Jersey
Hi
Sorry but it has been sleeting here in New Jersey and l was cleaning off my driveway and fielding office calls.
You are correct 1) and 2)
When my wife bought the Belkin it came with the USB network
adopter
It will work on my neighbor's router when he has it turned on but it's a weak signal.
l would like to deal with #1 first if possible and then l will call Belkin.
My problem is that l am still a semi novice
Am l better off just replacing the hard drive in order to get rid of anything that has invaded my computer.
What l have also noticed is that it takes at least 15 minutes for my computer to run almost right. But still slow and l have to use dial up until l get the wifi working. l have cable but my wife uses it for business with a polycom internet phone and that is the main reason for the wifi router.
Thanks
Thanks
Sorry but it has been sleeting here in New Jersey and l was cleaning off my driveway and fielding office calls.
You are correct 1) and 2)
When my wife bought the Belkin it came with the USB network
adopter
It will work on my neighbor's router when he has it turned on but it's a weak signal.
l would like to deal with #1 first if possible and then l will call Belkin.
My problem is that l am still a semi novice
Am l better off just replacing the hard drive in order to get rid of anything that has invaded my computer.
What l have also noticed is that it takes at least 15 minutes for my computer to run almost right. But still slow and l have to use dial up until l get the wifi working. l have cable but my wife uses it for business with a polycom internet phone and that is the main reason for the wifi router.
Thanks
Thanks
-
RealBlackStuff
- Admin
- Posts: 17517
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
If you follow my instructions for reinstalling W2K, you shouldn't have any problems with the 600X. Unless the hard disk is bollixed, deleting partitions/reformatting should do it.
What exactly is your network setup at home?
Cable --> wifi router (exact make/model please) -->wireless via Belkin MIMO adapter F5D9050 (right?) to T61 (7-character Type/Model please)
Can you use a CAT5 cable to connect router and T61?
Have you tried resetting the router?
You can see your neighbor's router on the T61, but the T61 can not see your own router?
Get the program Netstumbler from http://www.netstumbler.com/downloads/ and install that.
What exactly is your network setup at home?
Cable --> wifi router (exact make/model please) -->wireless via Belkin MIMO adapter F5D9050 (right?) to T61 (7-character Type/Model please)
Can you use a CAT5 cable to connect router and T61?
Have you tried resetting the router?
You can see your neighbor's router on the T61, but the T61 can not see your own router?
Get the program Netstumbler from http://www.netstumbler.com/downloads/ and install that.
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Wipe NVMe disk, change GPT to MBR?
by Edward Mendelson » Sat Mar 18, 2017 5:36 pm » in Thinkpad - General HARDWARE/SOFTWARE questions - 7 Replies
- 1143 Views
-
Last post by Edward Mendelson
Sat Apr 15, 2017 9:51 am
-
-
-
x230 compatible fans (want to upgrade and make it quieter)
by blueredcat123 » Sun Jan 01, 2017 5:41 pm » in ThinkPad X200/201/220 and X300/301 Series - 4 Replies
- 997 Views
-
Last post by mj0
Wed Jan 04, 2017 4:52 pm
-
-
-
remove and clean under the trackpoint mouse buttons
by louisJ » Fri Feb 10, 2017 1:51 pm » in ThinkPad T430/T530 and later Series - 4 Replies
- 468 Views
-
Last post by louisJ
Fri Feb 10, 2017 3:15 pm
-
-
-
FS: NEC Versa VXi laptop from the year 2000
by RealBlackStuff » Sat Jan 21, 2017 11:59 am » in Marketplace - Forum Members only - 2 Replies
- 307 Views
-
Last post by RealBlackStuff
Sat Jan 21, 2017 4:52 pm
-
Who is online
Users browsing this forum: No registered users and 6 guests



