WXGA to WXGA+ Upgrade

T60/T61 series specific matters only
Post Reply
Message
Author
LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

WXGA to WXGA+ Upgrade

#1 Post by LenovoT61B » Fri Feb 06, 2009 4:28 pm

Can it be done on a T61? I currently have a WXGA screen and I am able to buy a WXGA+ screen. Will it be compatible? The WXGA+ screen is for the T61, but it is a higher resolution. Also, when installing it, are the Black Pieces that cover the screws easy to come off and on?

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#2 Post by Harryc » Fri Feb 06, 2009 6:12 pm

Yes it can be done if the wxga+ screen is a genuine Lenovo part (see list below). The screw covers are easily removeable with a sharp exacto knife.

220nit, LG-Philips 42T0406
200nit, LG-Philips 42T0427
200nit, Samsung 13N7108
200nit, Samsung 42T0412
200nit, Samsung 42T0453

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#3 Post by LenovoT61B » Fri Feb 06, 2009 6:14 pm

Once the caps are off with exacto knife, they go on easily right?

This was ordered directly from Lenovo. I also notice I have an integrated camera, this has nothing to do with the LCD right? It's not attached to it or anything? That wouldn't make sence..

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#4 Post by Harryc » Fri Feb 06, 2009 6:16 pm

The LCD has nothing to do with the camera. Worst case with the stickers is you might have to use double sided tape cut to size if the existing glue doesn't hold.

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#5 Post by LenovoT61B » Fri Feb 06, 2009 6:17 pm

Harryc wrote:The LCD has nothing to do with the camera. Worst case with the stickers is you might have to use double sided tape cut to size if the existing glue doesn't hold.
I currently have a 185 NIT screen. I got the 220 NITS. Should there be a big difference in terms of back light?

I don't need to change any other parts to do this upgrade right?

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#6 Post by Harryc » Fri Feb 06, 2009 6:21 pm

No other parts are required. The 220 NIT would certainly be noticeably brighter than the 185.

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#7 Post by LenovoT61B » Fri Feb 06, 2009 6:22 pm

Harryc wrote:No other parts are required. The 220 NIT would certainly be noticeably brighter than the 185.
And I am going from Samsung to LG. Another noticeable upgrade right?

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#8 Post by Harryc » Fri Feb 06, 2009 6:26 pm

I haven't seen a 220nit LG, so no comment.

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#9 Post by LenovoT61B » Fri Feb 06, 2009 10:28 pm

Harryc wrote:I haven't seen a 220nit LG, so no comment.
If the upgrade is done by a hired technician, it will be perfectly fine right? Exactly the same laptop just a better screen..?

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#10 Post by Harryc » Fri Feb 06, 2009 11:07 pm

Theorhetically that would be true, but the quality of the repair is dependant upon the skill of the technician.

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#11 Post by LenovoT61B » Sat Feb 07, 2009 9:35 am

On the manual it says I need double sided adhesive tape. Where would I go about finding the right tape for this? I want to make sure the tape is not to thick.

LenovoT61B
Posts: 25
Joined: Tue Feb 03, 2009 10:06 pm
Location: Montreal, Quebec, Canada

Re: WXGA to WXGA+ Upgrade

#12 Post by LenovoT61B » Sun Feb 15, 2009 8:38 pm

Harryc wrote:Yes it can be done if the wxga+ screen is a genuine Lenovo part (see list below). The screw covers are easily removeable with a sharp exacto knife.

220nit, LG-Philips 42T0406
200nit, LG-Philips 42T0427
200nit, Samsung 13N7108
200nit, Samsung 42T0412
200nit, Samsung 42T0453
Which Samsung should I get?

eyeland
Sophomore Member
Posts: 178
Joined: Mon Sep 07, 2009 11:02 am
Location: Copenhagen, Denmark

Re: WXGA to WXGA+ Upgrade

#13 Post by eyeland » Thu Jun 24, 2010 8:46 am

HI
Before I go ahead with the upgrade from wxga to wxga+ I just wanted to make sure that I understood it correctly.
Am I right in assuming that the 42T0427 at http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 1953wt_915 will be compatible with my t61 7661-gn3?
And furthermore, can the partnumbers be fully trusted in regards to nit when I buy "unoriginal" "compatible" from ebay?
If the numbers can be trusted I have the choice between a (220nit, LG-Philips
42T0406 at 135$) and a (200nit, LG-Philips 42T0427 at 120$) both incl shipping from US to DK
Any noticeable difference between 220 and 200 nit?
Regards
Rune
W530 FHD - 32GB Ram - K2000m - >1TBSSD |
Modded T61| Scarlet Saffire 6i6-Phillips IPS | Win10x64
---
daybreak broke me loose and brought me back...

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: WXGA to WXGA+ Upgrade

#14 Post by Harryc » Thu Jun 24, 2010 8:57 am

1.) Yes
2.) Never trust EBay. Get a confirmation from the seller. Compatible could mean anything.
3.) Brightness

eyeland
Sophomore Member
Posts: 178
Joined: Mon Sep 07, 2009 11:02 am
Location: Copenhagen, Denmark

Re: WXGA to WXGA+ Upgrade

#15 Post by eyeland » Mon Aug 30, 2010 10:01 am

cheers, much obliged, finally gathered the courage to order one :)
W530 FHD - 32GB Ram - K2000m - >1TBSSD |
Modded T61| Scarlet Saffire 6i6-Phillips IPS | Win10x64
---
daybreak broke me loose and brought me back...

andy2000
Freshman Member
Posts: 61
Joined: Thu Feb 01, 2007 12:17 am
Location: Austin, TX

Re: WXGA to WXGA+ Upgrade

#16 Post by andy2000 » Tue Aug 31, 2010 5:17 pm

I attempted to do this upgrade to a 14" T61 using a non-Lenovo LCD that I had sitting around. The LCD worked, but the image was stretched and distorted. Could this be caused by having in incompatible (or no) EDID in the WXGA+ LCD? Does anyone have a copy of the Lenovo WXGA+ EDID they can share? I have an EPROM programmer, so reprogramming the EDID is not a problem.

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1162
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: WXGA to WXGA+ Upgrade

#17 Post by Norway Pad » Wed Sep 01, 2010 4:54 am

LenovoT61B wrote:On the manual it says I need double sided adhesive tape. Where would I go about finding the right tape for this? I want to make sure the tape is not to thick.
I was shopping for some parts for my own T60, and I found these. No double sided tape needed, just put brand new ones back on. http://cgi.ebay.com/IBM-Lenovo-Thinkpad ... 3a5a18738f
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 2 guests