x200 BSOD after upg. from 2-4gb ram (2.02 bios)

X200, X201, X220 (including equivalent tablet models) and X300, X301 series specific matters only.
Post Reply
Message
Author
whmcqueary
Posts: 5
Joined: Sat Feb 28, 2009 2:26 am
Location: Springfield, MO

x200 BSOD after upg. from 2-4gb ram (2.02 bios)

#1 Post by whmcqueary » Mon Mar 09, 2009 2:34 pm

x200 (7454-2qu)
vista business 32
Upgraded with 2gb I ordered from Lenovo. (P/N: 43R1988)

It looks like moving off 2.02 fixed it for some people. Anyone have problems with this?

I found this post but wasn't sure about downloading the Japanese 2.04 bios:
http://forums.lenovo.com/lnv/board/mess ... ad.id=7331
Anything I should worry about trying to use a foreign bios update?

And some people said downgrading to 1.10 bios would fix the issue:
http://www-307.ibm.com/pc/support/site. ... MIGR-70347
Is there anything special about flashing a bios to an earlier version? Or will it just overwrite? I've only upgraded, never downgraded.

Thanks.
X200 (7454-2QU)
S10 (4231)

Marin85
Senior ThinkPadder
Senior ThinkPadder
Posts: 2975
Joined: Sat May 12, 2007 10:54 am
Location: Munich, Germany

Re: x200 BSOD after upg. from 2-4gb ram (2.02 bios)

#2 Post by Marin85 » Mon Mar 09, 2009 5:16 pm

Are you able to boot up in windows at all? Are you able to run some Linux Live CD? Any beeps after powering on the machine?

Run a few passes of memtest86+ to test the memory. What RAM configuration does memtest report then?

Marin
Last edited by Marin85 on Mon Mar 09, 2009 7:13 pm, edited 1 time in total.
IBM Lenovo Z61p | 15.4'' WUXGA | Intel Core 2 Duo T7400 2x 2.16GHz | 4 GB Kingston HyperX | Hitachi 7K500 500 GB + WD 1TB (USB) | ATI Mobility FireGL V5200 | ThinkPad Atheros a/b/g | Analog Devices AD1981HD | Win 7 x86 + ArchLinux 2009.08 x64 (number crunching)

whmcqueary
Posts: 5
Joined: Sat Feb 28, 2009 2:26 am
Location: Springfield, MO

Re: x200 BSOD after upg. from 2-4gb ram (2.02 bios)

#3 Post by whmcqueary » Mon Mar 09, 2009 6:56 pm

I get the lenovo screen and it starts to load windows but then bsod after a few seconds. Safe mode, last known good config both = BSOD too.

I'm running memtest right now. We'll see what it shows tomorrow.
X200 (7454-2QU)
S10 (4231)

whmcqueary
Posts: 5
Joined: Sat Feb 28, 2009 2:26 am
Location: Springfield, MO

Re: x200 BSOD after upg. from 2-4gb ram (2.02 bios)

#4 Post by whmcqueary » Tue Mar 10, 2009 10:23 am

No errors detected with Memtest86+.

I'm able to boot both centos and knoppix live cd's just fine so maybe it's something with windows and not my bios. I tried to repair the windows install but it didn't help. I might just boot R&R and do a factory default since I haven't put much on the system yet. I'm not sure what else to try.
X200 (7454-2QU)
S10 (4231)

Marin85
Senior ThinkPadder
Senior ThinkPadder
Posts: 2975
Joined: Sat May 12, 2007 10:54 am
Location: Munich, Germany

Re: x200 BSOD after upg. from 2-4gb ram (2.02 bios)

#5 Post by Marin85 » Tue Mar 10, 2009 10:36 am

To me it sounds like a windows problem, but I also don´t exclude some BIOS problem. What is the BIOS version? BTW, what are the RAM specs reported by memtest (all the same for both modules)? I remember reading something about Vista 32-bit BSODing with 4 GBs of RAM, but that story was even before SP1... I´ll try to find this piece of information again. Some folks also suggest that the problem may be caused by a bad driver, but I don´t think this is the case because the same happens when booting into Safe Mode (with as much drivers disabled as possible).
IBM Lenovo Z61p | 15.4'' WUXGA | Intel Core 2 Duo T7400 2x 2.16GHz | 4 GB Kingston HyperX | Hitachi 7K500 500 GB + WD 1TB (USB) | ATI Mobility FireGL V5200 | ThinkPad Atheros a/b/g | Analog Devices AD1981HD | Win 7 x86 + ArchLinux 2009.08 x64 (number crunching)

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X200/201/220 and X300/301 Series”

Who is online

Users browsing this forum: No registered users and 5 guests