Missing partion within my Restore points menu on X301

X200, X201, X220 (including equivalent tablet models) and X300, X301 series specific matters only.
Post Reply
Message
Author
elvair
Freshman Member
Posts: 95
Joined: Wed Jun 25, 2008 3:42 am
Location: London, UK

Missing partion within my Restore points menu on X301

#1 Post by elvair » Fri Apr 03, 2009 4:40 pm

When I go to System Properties -> System Protection -> Automatic Restore Points

I see the following available disks
SERVICEV003 (S:)
SW_Preload (C:) (System)
Lenovo (Q:)
SW_Preload (C:) (Missing)

And I only have one tick in front of SW_Preload (C:) (Missing) , clearly it is some sort of bug, why does it say missing ? This picture is after total factory restoration.
And what are other partions for ?

Many thanks ! )
X301, Intel Core 2 DUO U9400 @ 1.40GHz, 128 SSD, 4GB , Vista Ultimate 32 Bit

Marin85
Senior ThinkPadder
Senior ThinkPadder
Posts: 2975
Joined: Sat May 12, 2007 10:54 am
Location: Munich, Germany

Re: Missing partion within my Restore points menu on X301

#2 Post by Marin85 » Sat Apr 04, 2009 2:00 am

My guess is that the missing SW_Preload (C:) is the old one, and some part of its entry has remained in the partition table despite (or because of (?) ) the restore to factory contents, hence it can be read by System Protection (just my guess here). What do you see under Disk Management?

Q partition is the Lenovo recovery partition that contains compressed form of their preload image and that can be used for various recovery options including factory restore. I believe S partition contains the bootloader for both Q and C as well as Rescue&Recovery predesktop area, so you can boot into the latter using the ThinkVantage button upon power-on. Since one needs the predesktop area in order to be able to use the contents of the recovery partition, partition Q would be useless without partition S.

Hope this helps,

Marin
IBM Lenovo Z61p | 15.4'' WUXGA | Intel Core 2 Duo T7400 2x 2.16GHz | 4 GB Kingston HyperX | Hitachi 7K500 500 GB + WD 1TB (USB) | ATI Mobility FireGL V5200 | ThinkPad Atheros a/b/g | Analog Devices AD1981HD | Win 7 x86 + ArchLinux 2009.08 x64 (number crunching)

elvair
Freshman Member
Posts: 95
Joined: Wed Jun 25, 2008 3:42 am
Location: London, UK

Re: Missing partion within my Restore points menu on X301

#3 Post by elvair » Sat Apr 04, 2009 1:49 pm

Yeah, that certainly helps! Thanks

In disk management I dont see anything abnormal - 3 partions, C:, S:, Q: as intended. So that missing thing really puzzles me, whats more confusing is that it appears on absolutelly clean factory install. I googled it up and it appears that there are other people who are experiencing similar issue, however I could not find any sensible explanation as to what the problem is.

Also is there any way to hide somehow S: and Q: so that if someone "smart" accidentally gets access to my computer, they cant possibly do anything to cause any problems in restore system ?
X301, Intel Core 2 DUO U9400 @ 1.40GHz, 128 SSD, 4GB , Vista Ultimate 32 Bit

elvair
Freshman Member
Posts: 95
Joined: Wed Jun 25, 2008 3:42 am
Location: London, UK

Re: Missing partion within my Restore points menu on X301

#4 Post by elvair » Wed May 06, 2009 7:30 pm

Still looking for answer for that one,

just done clean factory recovery and still same stuff, any ideas what could it be ? :/
X301, Intel Core 2 DUO U9400 @ 1.40GHz, 128 SSD, 4GB , Vista Ultimate 32 Bit

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X200/201/220 and X300/301 Series”

Who is online

Users browsing this forum: No registered users and 4 guests