How to tell if a replacement part is refurbished or new.
-
thinkpadhk
- Posts: 46
- Joined: Tue Nov 09, 2004 5:27 pm
How to tell if a replacement part is refurbished or new.
Hello all.
If you've been following my posts about my experiences with IBM service, you'll know that they sent me a replacement hard drive and keyboard.
Questions:
1) How do I know if the hard drive that IBM sent me is a new one or a refurbished one?
2) How do I know if the keyboard they sent is a new one or a refurbished one?
If anyone can answer I'd really appreciate it.
Thanks!
hk
If you've been following my posts about my experiences with IBM service, you'll know that they sent me a replacement hard drive and keyboard.
Questions:
1) How do I know if the hard drive that IBM sent me is a new one or a refurbished one?
2) How do I know if the keyboard they sent is a new one or a refurbished one?
If anyone can answer I'd really appreciate it.
Thanks!
hk
hk
Re: How to tell if a replacement part is refurbished or new.
If it's got fragments of potato chips, flakes of dried skin, coffee spill stains and and worn-out lettering I think it's safe to say that you've been given a used one.thinkpadhk wrote:2) How do I know if the keyboard they sent is a new one or a refurbished one?
I wonder what the big deal is. Either a part works, or doesn't. IBM needs to replace defective parts with parts that work.
I'm working on a T30 that has a replacement motherboard that was "used." The old one had the memory bank problem. The serviceable used part they put in to replace the bad one, though "used" operates properly. I'm happy.
If a hard drive is "used" but operates according to spec, who cares if it is brand new or was used before?
With a keyboard, there is an aesthetic issue, but if the keys do what they are supposed to and the keyboard is clean and appears "like new," who cares if it actually was used, probably briefly, somewhere else?
Just my two cents.
I'm working on a T30 that has a replacement motherboard that was "used." The old one had the memory bank problem. The serviceable used part they put in to replace the bad one, though "used" operates properly. I'm happy.
If a hard drive is "used" but operates according to spec, who cares if it is brand new or was used before?
With a keyboard, there is an aesthetic issue, but if the keys do what they are supposed to and the keyboard is clean and appears "like new," who cares if it actually was used, probably briefly, somewhere else?
Just my two cents.
You raise some valid points. I have to laugh at people who scream and cry just because they haven't been issued brand new parts. As long as it works......Marc_G wrote:I wonder what the big deal is. Either a part works, or doesn't. IBM needs to replace defective parts with parts that work.
I'm working on a T30 that has a replacement motherboard that was "used." The old one had the memory bank problem. The serviceable used part they put in to replace the bad one, though "used" operates properly. I'm happy.
If a hard drive is "used" but operates according to spec, who cares if it is brand new or was used before?
With a keyboard, there is an aesthetic issue, but if the keys do what they are supposed to and the keyboard is clean and appears "like new," who cares if it actually was used, probably briefly, somewhere else?
Just my two cents.
-
thinkpadhk
- Posts: 46
- Joined: Tue Nov 09, 2004 5:27 pm
Thanks for the help everyone!
I guess my parts are new then. Yay!
Marc_G:
Uhhh... I guess you don't work in the tech industry. There's such a thing called "product life cycle". To put it simply... [censored] eventually "wears" out and stops working after a while.
For instance. I design semiconductor chips. We do extensive reliability tests on them to see how they degrade in time. We tell our customers that our chips are good for 40,000 cycles etc.
So if you're getting used parts, their that much closer to "wearing out" of their useful life cycle. Granted... the chips are usually designed to have enough margin to last for years and years and years.... but you get the point.
I guess my parts are new then. Yay!
Marc_G:
Uhhh... I guess you don't work in the tech industry. There's such a thing called "product life cycle". To put it simply... [censored] eventually "wears" out and stops working after a while.
For instance. I design semiconductor chips. We do extensive reliability tests on them to see how they degrade in time. We tell our customers that our chips are good for 40,000 cycles etc.
So if you're getting used parts, their that much closer to "wearing out" of their useful life cycle. Granted... the chips are usually designed to have enough margin to last for years and years and years.... but you get the point.
hk
Hi ThinkpadHK-
I understand your point. Actually I am in the tech industry and I did think about this point when I posted. But, in my experience things like keyboards or hard drives either fail fairly quickly or last a good long time. If the keyboard is in good enough condition to qualify as a refurb part, it probably has gotten little use ever. Probably from a return or something. And I've had two HD's die on me, both in the first month of practical use, the others (about two dozen, starting with a 5 MB drive for an Atari computer!), lasted until they were obsolete.
Further, the computer manufacturer gives a warranty that basically says the computer will work X years, right? So if they replace the original component which has failed (thus, the original component is "used") and they replace it with a working "used" part that probably got less use than the original one, I don't see any ethical problem. Frankly I'd rather get a burned in component than a brand new one for stuff like this.
There are certainly exceptions, like backlight tubes and other components that have a relatively short life.
Fundamentally the used components that get put into serviceable stock are usually lightly used. This forms part of my attitude towards accepting used parts in this context.
Marc
I understand your point. Actually I am in the tech industry and I did think about this point when I posted. But, in my experience things like keyboards or hard drives either fail fairly quickly or last a good long time. If the keyboard is in good enough condition to qualify as a refurb part, it probably has gotten little use ever. Probably from a return or something. And I've had two HD's die on me, both in the first month of practical use, the others (about two dozen, starting with a 5 MB drive for an Atari computer!), lasted until they were obsolete.
Further, the computer manufacturer gives a warranty that basically says the computer will work X years, right? So if they replace the original component which has failed (thus, the original component is "used") and they replace it with a working "used" part that probably got less use than the original one, I don't see any ethical problem. Frankly I'd rather get a burned in component than a brand new one for stuff like this.
There are certainly exceptions, like backlight tubes and other components that have a relatively short life.
Fundamentally the used components that get put into serviceable stock are usually lightly used. This forms part of my attitude towards accepting used parts in this context.
Marc
-
CoolRunnings
- Junior Member

- Posts: 270
- Joined: Tue Jan 04, 2005 10:29 pm
- Location: Tucson, Arizona
- Contact:
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Seller of refurbished or new batteries for a T61?
by portsample » Fri Apr 07, 2017 4:52 pm » in Marketplace - Forum Members only - 3 Replies
- 432 Views
-
Last post by TuuS
Sun Apr 30, 2017 7:03 am
-
-
-
Best refurbished TP under £250-270?
by glossywhite » Fri Apr 28, 2017 2:48 pm » in GENERAL ThinkPad News/Comments & Questions - 8 Replies
- 360 Views
-
Last post by glossywhite
Wed May 03, 2017 6:36 pm
-
-
-
FS: Fully Modded T430 / i7-3840QM / dGPU Heatsink / HD+ / Classic Keyboard / Refurbished
by n4ru » Fri May 05, 2017 2:12 pm » in Marketplace - Forum Members only - 1 Replies
- 659 Views
-
Last post by n4ru
Wed May 31, 2017 10:32 pm
-
-
- 15 Replies
- 1866 Views
-
Last post by Mike Pickwick
Thu Apr 06, 2017 8:12 pm
Who is online
Users browsing this forum: No registered users and 6 guests




