HELP! PowerLeap Ctrl Panel & Cache Utility prog probs 770Z

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
eloqutus
Posts: 8
Joined: Mon May 12, 2008 11:11 pm

HELP! PowerLeap Ctrl Panel & Cache Utility prog probs 770Z

#1 Post by eloqutus » Sat Jul 18, 2009 8:36 pm

Hey All :help: !

All I NEED to be able to do at this point is enable the L2 cache on the 650MHz, P-III, MMC-2 CPU that I have upgraded to on this
TP 770Z. The problem is—when I attempt to install PowerLeap CPU Control Panel v5.1.0.0.1—I get the following error dialog box during the installation process:

Powerleap CPU Control Panel Setup

An error occurred during the move data process: -113
Component:
File Group:
File:C:\DOCUME~1\User\LOCALS~1\Temp\WZS8.tmp\data1.hdr

The program doesn’t crap out until after you make a selection from the “Select Upgrade installed” dialog box which has the following 16 items from which you MUST choose 1 item (and I have tried items 1 & 2):

None - I’m looking for an upgrade
Other
PL-54CMMX
PL-586
PL-IP3 1.0
PL-IP3 2.0
PL-IP3/T
PL-K6-III
PL-Neo
PL-Neo/T
PL-0D54C
PL-P4/N
PL-Pro/II
PL-ProMMX
PL-ProMMX Plus!
Renaissance Series

Then, after choosing from the above list—and AFTER you click on the “Next” button at the bottom of this list—the error presents itself; seemingly regardless of what selection you previously made via the afore-mentioned “Select Upgrade installed” choices.

This is the exact same error as the one SGypsyMermaid was getting
(see http://forum.thinkpads.com/viewtopic.ph ... xe)—except that I can't rectify my problem the way SGypsyMermaid did by following PKiff's instruction to d/l PowerLeap Cache Utility (at http://www.powerleap.com/downloads/util ... tility.zip) because the link is dead :( .

Would someone PLEASE help me to get my L2 Cache going via some kind of software means; maybe someone has an older version of PowerLeap CPU Control Panel and/or Cache Utility that they would share with me. This is a desperate :cry: for :help: !

Sincerely,
eloqutus
Last edited by eloqutus on Wed Nov 19, 2014 3:37 pm, edited 10 times in total.

pkiff
Moderator
Moderator
Posts: 1426
Joined: Wed May 05, 2004 9:17 am
Location: Toronto, Canada

Re: HELP! PowerLeap Ctrl Panel & Cache Utility prog probs 770Z

#2 Post by pkiff » Sun Jul 19, 2009 1:01 am

If you PM me your email address, then I can send you a copy of the cacheutility that I've been using.

Phil.
W520 (dual-boot Windows 10/Ubuntu 15) · X61 Tablet SXGA+ · T60p UXGA · Legacy: X60T, 600X, 770Z
Thinkpad Media Centre: X61T running XBMC with Broadcom Crystal HD BCM970015, Creative X-Fi Surround 5.1 plugged into Cambridge Audio Sonata AR30 receiver

eloqutus
Posts: 8
Joined: Mon May 12, 2008 11:11 pm

Re: HELP! PowerLeap Ctrl Panel & Cache Utility prog probs 77

#3 Post by eloqutus » Mon Jul 20, 2009 2:00 am

Phil,

Thanks for the Cache Configuration Tool; it really seems to have done the trick in getting the L2 cache on my 650MHz CPU initiated as evidenced by the Intel Processor Frequency ID Utility, and by CPU-Z!
:bow:

Sincerely,
eloqutus
770Z, 9549-82U | WXP Pro SP3 | 650MHz PIII running @ 500MHz | 512MB 100MHz RAM; added 2-256MB sticks; removed 64MB, 66MHz Base RAM, slot empty | Trident Video Accelerator 3D Cyber9397DVD AGP integrated video; 14.1" Display | DVD-ROM FRU 05K9014 = Toshiba Model SD-C2002.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: GMGolds and 3 guests