Hard drive caddy orientation

T60/T61 series specific matters only
Post Reply
Message
Author
vinuneuro
Junior Member
Junior Member
Posts: 331
Joined: Wed Apr 18, 2007 5:09 pm
Location: Chicago, IL
Contact:
Contact vinuneuro

Hard drive caddy orientation

#1 Post by vinuneuro » Wed Aug 26, 2009 3:34 pm

Should the metal grating in the hdd caddy be at the top or the bottom? Does it matter?
Top
sktn77a
ThinkPadder
ThinkPadder
Posts: 1988
Joined: Thu Apr 29, 2004 9:44 am
Location: Chapel Hill, NC

Re: Hard drive caddy orientation

#2 Post by sktn77a » Wed Aug 26, 2009 4:41 pm

It should cover the PCB (if that's what you mean).
Keith
(Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2347-UN9, T430 2349-L64, T430 2342-CTO, H520S 2561-1LU, Ideapad K1)
Top
vinuneuro
Junior Member
Junior Member
Posts: 331
Joined: Wed Apr 18, 2007 5:09 pm
Location: Chicago, IL
Contact:
Contact vinuneuro

Re: Hard drive caddy orientation

#3 Post by vinuneuro » Wed Aug 26, 2009 5:21 pm

The pcb is inside the hdd case, it's covered. Or am I thinking about it wrong? I'm talking about one of these:

http://www.hexparts.com/IBM-Lenovo-Thin ... p_880.html#
Top
yak
ThinkPadder
ThinkPadder
Posts: 1256
Joined: Thu Dec 06, 2007 3:17 pm
Location: NRW, Germany

Re: Hard drive caddy orientation

#4 Post by yak » Wed Aug 26, 2009 5:36 pm

That page shows a HDD with the caddy already installed.

One side of the HDD has the labels, the other shows bare circuit board. The caddy covers the board. The black strap is on the opposite side of the connectors (as seen on the linked page).

After installing the HDD in the caddy, you insert it into the laptop with the caddy grid facing up.
ThinkPad™ X201 / AFFS-120
i5-560M 2.67Ghz, 8GB RAM, Samsung 840 Pro 256GB SSD, Win 8 Pro 64-bit, UltraBase X200, ThinkPad Compact USB Keyboard,
Dell U2713HM (2560x1440, IPS), ExpressCard USB 3.0 (2 ports, flush), Nexus 7+10
Top
vinuneuro
Junior Member
Junior Member
Posts: 331
Joined: Wed Apr 18, 2007 5:09 pm
Location: Chicago, IL
Contact:
Contact vinuneuro

Re: Hard drive caddy orientation

#5 Post by vinuneuro » Fri Sep 11, 2009 9:48 pm

Hey, are you guys sure about this? On the WD hard drives is written "Fragile, do not cover any hard drive holes." All the holes in the hard drive are located on the PCB side. Thoughts?
Top
LegendaryKA8
Junior Member
Junior Member
Posts: 394
Joined: Wed Sep 05, 2007 3:46 am
Location: Colo. Springs, CO
Contact:
Contact LegendaryKA8

Re: Hard drive caddy orientation

#6 Post by LegendaryKA8 » Fri Sep 11, 2009 9:58 pm

You should be okay with that. I've never really had a problem with covering them, as they are filtered vent holes in order to relieve changes in atmospheric pressure. They don't need that much airflow, and the minuscule gap between them and the caddy will be sufficient.
ThinkPads:T21(retired), X200(retired), T500(busted) T400(retiring), T430(upcoming)
Other: Dell Precision M6700(desk hog)
Top
vinuneuro
Junior Member
Junior Member
Posts: 331
Joined: Wed Apr 18, 2007 5:09 pm
Location: Chicago, IL
Contact:
Contact vinuneuro

Re: Hard drive caddy orientation

#7 Post by vinuneuro » Sat Sep 12, 2009 8:54 pm

You are absolutely right. I tested my thought by flipping the hdd over in the caddy so that vent holes would be exposed, but it didn't make any difference in temp at all.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 2 guests