W500: small gap on the left when lid is closed?

W500/510/520 and W700/710 series specific matters only
Post Reply

Is your lid 'perfectly' flushed with the base?

YES: both sides are perfect.
0
No votes
NO: one or both sides have a gap.
5
100%
 
Total votes: 5

Message
Author
IMaPC
Posts: 13
Joined: Mon Sep 07, 2009 12:46 am
Location: Glendale, CA

W500: small gap on the left when lid is closed?

#1 Post by IMaPC » Wed Sep 09, 2009 10:24 am

hi, when i got my laptop, i noticed there was a gap on the left side between the lcd and the base. it's about 1-2mm.
the right side is nicely flush with the base.

is this normal? does anyone else have this problem?
maybe i should be seeing the glass as half full? at least i got one good flush side.
W500 WUXGA, T9600, 42T3143

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15736
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

Re: W500: small gap on the left when lid is closed?

#2 Post by ajkula66 » Thu Sep 10, 2009 12:01 am

Welcome to the forum!

I've used a loaned W500 for about six months and both sides had a slight gap. Having said that, most of the ThinkPads I've owned were along these lines, with the R5x series probably having the most prominent one of them all.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: R61

PMs requesting personal tech support will be ignored.

IMaPC
Posts: 13
Joined: Mon Sep 07, 2009 12:46 am
Location: Glendale, CA

Re: W500: small gap on the left when lid is closed?

#3 Post by IMaPC » Tue Sep 15, 2009 4:25 pm

i see. that sucks.
W500 WUXGA, T9600, 42T3143

IMaPC
Posts: 13
Joined: Mon Sep 07, 2009 12:46 am
Location: Glendale, CA

Re: W500: small gap on the left when lid is closed?

#4 Post by IMaPC » Sat Sep 26, 2009 1:28 pm

oh my god.
you guys won't believe how i "solved" this.

so i noticed that the gap on the left side was growing larger and larger and reached a whopping 3mm when closed.
when i was cleaning the top of the lid, i felt this hard lump on the left-center side. it felt like it harder than the frame. i was afraid the frame cracked/broke because it felt different from the rest of the lid, like a broken bone on the arm if i must use an example.

so, i pushed against it hoping it would pop back in and be straight, and it WORKED! i felt a small click and now my laptop has an acceptable .5 mm gap on one side, and a .2 mm gap on the other.

it was was just a broken frame or poor assembly after all.~ i'm so glad....
W500 WUXGA, T9600, 42T3143

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad W500/510/520 and W7x0 Series”

Who is online

Users browsing this forum: No registered users and 4 guests