WTB: Z61t palmrest w/o fingerpint reader

[eliu01]

As the subject says. Must be from a Z61t - tried a Z60t palmrest and it's not quite right. Ideally no fingerprint reader please. Thanks!

Eric Liu

[sparta.rising]

The palmrests for models with and without webcams are different, so you should specify that!

[Thinkpad88]

The palmrests for models with and without webcams are different, so you should specify that!

absolutely,u are correct.if non-webcam,z60t can be compatible with z61t....

[eliu01]

Thanks for the replies, but Lenovo lists only two parts for the Z61t palmrest - with (41W4840) and without (41W4842) fingerprint reader. No other parts are listed to show dependence on the webcam. Besides, my current Z61t palmrest has a cutout for the webcam even though it does not have one.

[sparta.rising]

Well, the Z60t palmrest for models without webcam is definitely different than the one with. I have one of both in front of me.

[Thinkpad88]

Thanks for the replies, but Lenovo lists only two parts for the Z61t palmrest - with (41W4840) and without (41W4842) fingerprint reader. No other parts are listed to show dependence on the webcam. Besides, my current Z61t palmrest has a cutout for the webcam even though it does not have one.

In lenovo system,there is FRU or PN to descpribe the part.FRU(Field Replace Unit) # is different from PN even the part are some.so,please confirm 41W4840 and 41W4842 are FRU or Part?