X41 2010 error; how solve or cancel it?

Message

OMNIBUS · #1 Post by **OMNIBUS** » Mon Dec 14, 2009 12:14 pm

hallo
i have an X41 with zif Hdd of 120 gb toshiba with its zif adapter to ide; when pc boots a 2010 error appears, in order to what i red here just because the new zif Hdd is not in the bios white list. after bios update it skips automatically!
so my question is, there is a way to cancel or solve this allert ?
some bios update or flashing even not official ones is avaiable?
thankyou

tim S · #2 Post by **tim S** » Mon Dec 14, 2009 1:13 pm

Reverting the BIOS back to 74uj01us or version 1.00 on the Driver's Matrix page will do the job.
They are now up to version 2.09 and I found my X41 to be a little shaky after the install,
(I don't know how else to describe it) but it did get rid of the 2010 error.
The error starts on the second BIOS update.
Tim S

systema · #3 Post by **systema** » Mon Dec 14, 2009 3:49 pm

tim S wrote:Reverting the BIOS back to 74uj01us or version 1.00 on the Driver's Matrix page will do the job.
They are now up to version 2.09 and I found my X41 to be a little shaky after the install,
(I don't know how else to describe it) but it did get rid of the 2010 error.
The error starts on the second BIOS update.
Tim S

Thanks for the definitive answer!

OMNIBUS · #4 Post by **OMNIBUS** » Mon Dec 14, 2009 4:15 pm

well...i tried to look for it (Bios version 1.0) but i found only the new ones; the 2.09.
so where i could download the 1.0?

#5 Post by **Harryc** » Mon Dec 14, 2009 5:45 pm

http://download.lenovo.com/ibmdl/pub/pc ... uj01us.exe

See the chart at the bottom of this link -
http://www-307.ibm.com/pc/support/site. ... MIGR-59206

OMNIBUS · #6 Post by **OMNIBUS** » Tue Dec 15, 2009 5:59 pm

thankyou for all harryc....i'll download and try it !
in any case if the issues, that bios update fixs, are more than benefits...at last i'll update again to 2.9

dwilsonfl · #7 Post by **dwilsonfl** » Tue Jan 05, 2010 11:10 pm

Just swapped my X40 HD into the X41 I picked up and I'm getting that error (2 beeps - hit ESC or F1) too. It mentions updating the firmware on the drive. Is that the deal?

#8 Post by **Harryc** » Wed Jan 06, 2010 2:32 am

That's the general deal, however not all firmware is able to be modified to circumvent the error. It is drive dependent...it varies from drive to drive.

Phil_123 · #9 Post by **Phil_123** » Sat Jan 09, 2010 3:36 am

Try googling the following search terms:

Code: Select all

X41 "error 2010 removed"

#10 Post by **Tasurinchi** » Sun Jan 10, 2010 4:38 pm

It's that so annoying?? My understanding is that the error beeps twice and then you have to press ESC to continue. For me it doesn't seem worth trying to modify a BIOS os downgrading to an ancient version... but it's just me...

my 0,02 cents...

Cheers

OMNIBUS · #11 Post by **OMNIBUS** » Sun Jan 10, 2010 5:00 pm

For me it doesn't seem worth trying to modify a BIOS os downgrading to an ancient version.

i saw what the earlier versions of bios fix...and i'm confused if downgrading to older version is the right thing to avoid the 2 beeps; then i have the last version that doesn't need to press esc..but automatically boot after beeps
so i'll see ....what to do!!

the best would be that some modified bios or something like come out from lenovo or somobody else...but in the meanwhile...

Phil_123 · #12 Post by **Phil_123** » Mon Jan 11, 2010 6:40 am

Look at my post above.

OMNIBUS wrote:i saw what the earlier versions of bios fix...and i'm confused if downgrading to older version is the right thing to avoid the 2 beeps; then i have the last version that doesn't need to press esc..but automatically boot after beeps
so i'll see ....what to do!!
the best would be that some modified bios or something like come out from lenovo or somobody else...but in the meanwhile...

OMNIBUS · #13 Post by **OMNIBUS** » Mon Jan 11, 2010 6:31 pm

Look at my post above.

which one phil?
could you write the link please?
i tried to "googling" for it but i found something fot hitachi only in other sites

lexicon · #14 Post by **lexicon** » Wed Oct 27, 2010 11:22 am

Just saw the link Phil,

But it's in Chinese, can anyone confirm it's a modified BIOS based on version 2.09 without error 2010 checking?

lukee · #15 Post by **lukee** » Sun Nov 21, 2010 7:58 am

Solution for 2010 error found! See this thread:
http://forum.thinkpads.com/viewtopic.php?f=2&t=92115

It's eliminated on T43 from this day. I suppose that the modder will mod BIOSes for X41 soon.

lexicon · #16 Post by **lexicon** » Sun Nov 21, 2010 1:54 pm

Wow, thanks for updating.

After all these years finally someone did it.

X41 2010 error; how solve or cancel it?

X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Re: X41 2010 error; how solve or cancel it?

Who is online