HDD enclosure that will actually fit a Lenovo HDD properly

[patient_ot]

Are there any good enclosures that will actually fit a Lenovo HDD properly? I bought an upgrade kit w/ an enclosure and cloning software but the enclosure doesn't really work right with a Lenovo HDD. I was able to get it to work but not without modifiying the enclosure in a way that won't really work for long term use. And yes, I did remove the rubber rails before trying to fit the HDD into the enclosure.

So, I need suggestions for an enclosure that will definitely work with my old Lenovo 2.5 HDD. I don't want to order one and then not have it work again.

Thanks.

[Harryc]

2.5 " hard drives are standard. If you left the metal HDD caddy attached that might cause an issue with an enclosure.

[patient_ot]

Pardon my ignorance, but can you point me to directions on how to remove the "caddy". I don't want to unscrew something from the HDD that's not supposed to be unscrewed.

Thanks.

[Harryc]

There are (2) screws on each side of the drive. Remove them and pull the caddy off.

[patient_ot]

Okay, got it. Thanks for the help!