Q's and suggestions for network setup
Q's and suggestions for network setup
To all the network gurus here, I would like some advice and/or suggestions on how to setup a network for specific tasks. I am not familiar with FTP type servers so would need some guidance or detailed info.
I would like to setup some type of network to share files (family photos and some documents) between my family in another city and I. We are trying to digitize 35mm negative film and keep them on a type of server/pc where my sister/me can access them. Maybe at family gatherings we can take a laptop and show them for others to see. I would likely be the one with physical access to the server/pc as I have the spare laptop and it is always on.
I would like to use any freeware that would make it cheaper, but not at the expense of ease of use. I am willing to use any OS that am not familiar with, as I love tinkering and learning. I still haven't purchased the film scanner, but will probably go for a Minolta Film scanner like the Dimage Dual Film Scanner III or IV. I would also like to use Seagate Goflex drives as I am looking to purchase their home theatre center for home entertainment center.
Any help and or suggestions would be greatly appreciated.
I would like to setup some type of network to share files (family photos and some documents) between my family in another city and I. We are trying to digitize 35mm negative film and keep them on a type of server/pc where my sister/me can access them. Maybe at family gatherings we can take a laptop and show them for others to see. I would likely be the one with physical access to the server/pc as I have the spare laptop and it is always on.
I would like to use any freeware that would make it cheaper, but not at the expense of ease of use. I am willing to use any OS that am not familiar with, as I love tinkering and learning. I still haven't purchased the film scanner, but will probably go for a Minolta Film scanner like the Dimage Dual Film Scanner III or IV. I would also like to use Seagate Goflex drives as I am looking to purchase their home theatre center for home entertainment center.
Any help and or suggestions would be greatly appreciated.
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
-
mediasponge
- Junior Member

- Posts: 286
- Joined: Mon Oct 22, 2007 5:57 pm
- Location: Milpitas, CA
Re: Q's and suggestions for network setup
If you really want to get into running some kind of server, you need to read up on all the security issues involved. Also, most Internet Service Providers have a Terms of Service clause that precludes subscribers from running their own FTP/WEB servers from home using their infrastructure, unless you open a commercial account. There's also the issue of protecting your internal network from intruders, and allowing family and others to access your server from outside. One standard way of doing that is to have the externally visible server in a DMZ, which is a secured zone that external machines can access, and internal machines can access through a gateway, but keeps external machines away from internal machines. It gets complicated. The quickest way to become a Spam source or have your identity stolen is to set up an unsecured web server on an unsecured internal network. You would probably need a hardware firewall with a DMZ port to do it that way. The other way that might be more compatible with current home routers is to use a VPN, but I think the DMZ method is more secure.
Maybe you could use Google Docs instead? http://docs.google.com/
You could also open a domain with GoDaddy and let them host it, but there would be a fee.
Maybe you could use Google Docs instead? http://docs.google.com/
You could also open a domain with GoDaddy and let them host it, but there would be a fee.
Re: Q's and suggestions for network setup
Thanks, this is definitely a start. I knew this wasn't going to be an easy task but, I knew it would be very informative. If I did decide to start a web server, do you have any must-reads to start??
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
-
mediasponge
- Junior Member

- Posts: 286
- Joined: Mon Oct 22, 2007 5:57 pm
- Location: Milpitas, CA
Re: Q's and suggestions for network setup
You could start by reading up on the Apache web server, which is pretty universal. A version is included in most Linux distros.
-
hunterman223
- Senior Member

- Posts: 749
- Joined: Thu May 13, 2010 4:27 pm
Re: Q's and suggestions for network setup
What I would do is setup the spare machine with regular Windows XP or Windows 7 Professional and IIS7. There are many different options for secured FTP or WebDAV, and you would not need a hardware firewall. Almost any non-ancient router will have the option for a DMZ. My ISP did not supply me with a static IP address, so I signed up for DynDNS, a service which allows users with dynamic IP addresses to access servers or what not remotely. You can either configure your router to send the updated IP in to DynDNS for updating, or do so with software on your computer. There our many IIS guides out there on the web, but it's pretty straightforward and all GUI based. PM me if you have questions.
Hunter Thompson
ThinkPad T400: T9400, 8GB, LG WXGA+, Samsung 830 128GB + WD Scorpio Black 500GB, Intel 5300agn, Win7 Pro x64
Others: IBM ThinkPad R40, Sony VAIO NR Series, HP TouchPad running CM9, Jailbroken iPod Touch 4G
ThinkPad T400: T9400, 8GB, LG WXGA+, Samsung 830 128GB + WD Scorpio Black 500GB, Intel 5300agn, Win7 Pro x64
Others: IBM ThinkPad R40, Sony VAIO NR Series, HP TouchPad running CM9, Jailbroken iPod Touch 4G
-
RealBlackStuff
- Admin
- Posts: 17485
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
Re: Q's and suggestions for network setup
I would suggest to create your own website, where access is limited via login/password
See e.g. this: http://www.phpeasystep.com/phptu/6.html
'Renting' space for a website costs peanuts, and the software is free.
I have several accounts with www.hostm.com to run a string of websites from. I register them via www.godaddy.com
Cost per website per year: ca. $35.-
Quite a bit cheaper than putting hardware aside for a rarely used web server...
See e.g. this: http://www.phpeasystep.com/phptu/6.html
'Renting' space for a website costs peanuts, and the software is free.
I have several accounts with www.hostm.com to run a string of websites from. I register them via www.godaddy.com
Cost per website per year: ca. $35.-
Quite a bit cheaper than putting hardware aside for a rarely used web server...
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
Re: Q's and suggestions for network setup
Thanks for the new info!! I have been reading and put off by the security it would take to maintain a web server. So I have thought about it a little less, but now am looking forward to the reads in what RBS suggested. Thanks again, and I will still keep up with this topic and post my status when I start the project.
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
Re: Q's and suggestions for network setup
I'd like to recommend NearlyFreeSpeech.net as a web host. It's simple, reliable, and best of all they take a *very* pro-free-speech stance.
Oh, and it's pay-for-what-you-use. This has two big advantages: 1) you pay for only as much as you actually use -- if you don't use much, you don't pay much. 2) You won't get promised an "unlimited" plan only to find that you're cut off for simply trying to use the services you paid for.
Finally, they offer domain registrations and (unlike GoDaddy) they won't deactivate your domain and hold it hostage until you pay them ransom money just because you posted something that someone complained about.
Oh, and it's pay-for-what-you-use. This has two big advantages: 1) you pay for only as much as you actually use -- if you don't use much, you don't pay much. 2) You won't get promised an "unlimited" plan only to find that you're cut off for simply trying to use the services you paid for.
Finally, they offer domain registrations and (unlike GoDaddy) they won't deactivate your domain and hold it hostage until you pay them ransom money just because you posted something that someone complained about.
Need help with Linux or FreeBSD? Catch me on IRC: I'm ThinkRob on FreeNode and EFnet.
Code: Select all
Current laptop: X1 Carbon 3
Current workstation: noneRe: Q's and suggestions for network setup
If it is just file sharing you care about and not setting up a Web service to view the files, I would like to suggest a different alternative.
Get a "seed-box" - usually used for torrenting files.
I have one in Australia and pay 3 months up front for less that $10 CAN/month - that's pretty cheap!!!
I have like 4GB worth of bandwidth/month and 100GB of HD space - you can get more space if needed.
The great thing about this that the company does not restrict what you put on it, they have the seed-boxes in HA configuration - (High Availability) so they is virtually no time your box will be down.
I access my files via SSH/SCP - they have FTP also, but I'm anal about security.
And with a good SSH/SCP client you can script file transfers over night when it won't kill your network at home.
The only real maintenance you will have to perform, is clean up.
Ensure you remove the older files so there is enough room for the newer ones before your transfer starts.
But again - you get SHELL access, so a single CRON job is all you need.
Good luck
Get a "seed-box" - usually used for torrenting files.
I have one in Australia and pay 3 months up front for less that $10 CAN/month - that's pretty cheap!!!
I have like 4GB worth of bandwidth/month and 100GB of HD space - you can get more space if needed.
The great thing about this that the company does not restrict what you put on it, they have the seed-boxes in HA configuration - (High Availability) so they is virtually no time your box will be down.
I access my files via SSH/SCP - they have FTP also, but I'm anal about security.
And with a good SSH/SCP client you can script file transfers over night when it won't kill your network at home.
The only real maintenance you will have to perform, is clean up.
Ensure you remove the older files so there is enough room for the newer ones before your transfer starts.
But again - you get SHELL access, so a single CRON job is all you need.
Good luck
ThinkPad X60 Tablet (6363-C7U)
Intel Core 2 Duo L7400(1.5GHz)
4GB Memory / Seagate ST9500420AS 500GB HD
12.1in 1400x1050 LCD ( Intel GMA950 )
SD Card / 9 Cell Battery / Bluetooth / Wifi Atheros AR5BXB72
MacOSX 10.6.4
Intel Core 2 Duo L7400(1.5GHz)
4GB Memory / Seagate ST9500420AS 500GB HD
12.1in 1400x1050 LCD ( Intel GMA950 )
SD Card / 9 Cell Battery / Bluetooth / Wifi Atheros AR5BXB72
MacOSX 10.6.4
Re: Q's and suggestions for network setup
Ah. Well if it's file-hosting you're after, yes, something like that (or Amazon AWS) is the way to go, no question.Neflem wrote:If it is just file sharing you care about and not setting up a Web service to view the files, I would like to suggest a different alternative.
Need help with Linux or FreeBSD? Catch me on IRC: I'm ThinkRob on FreeNode and EFnet.
Code: Select all
Current laptop: X1 Carbon 3
Current workstation: noneRe: Q's and suggestions for network setup
Thanks for the suggestions, I will read up on them.
Z61p (WUXGA)/2.16ghz/2gb/60gb, R51/1.8ghz/1gb/160gb, R40/1.5ghz/2gb/80gb, 600E/366mhz/416mb/20gb, Project R51 with SXGA+
-
- Similar Topics
- Replies
- Views
- Last post
-
-
My P50 impressions and setup experience
by furball4 » Sat Jan 07, 2017 3:55 am » in ThinkPad W530 and later Series - 8 Replies
- 1120 Views
-
Last post by Tim-ANC
Fri Jan 27, 2017 11:44 am
-
-
-
Replace beloved X61T... Suggestions?
by bobcardone » Sun Jan 29, 2017 10:26 am » in Thinkpad - General HARDWARE/SOFTWARE questions - 1 Replies
- 1329 Views
-
Last post by TPFanatic
Sun Jan 29, 2017 1:52 pm
-
-
-
Suggestions: What to upgrade on an X220?
by whereskarlo » Wed Feb 15, 2017 6:19 am » in ThinkPad X200/201/220 and X300/301 Series - 10 Replies
- 2082 Views
-
Last post by TankPad
Sat Mar 25, 2017 12:36 pm
-
-
- 2 Replies
- 1198 Views
-
Last post by upgrades
Wed Feb 15, 2017 3:42 pm
Who is online
Users browsing this forum: No registered users and 7 guests




