'Error 0200 Failure Fixed Disk 1' when installing new HDD.
'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Hi, I'm new to this forum and have a problem that has me stumped. I own a Thinkpad T43p, 2.26Ghz CPU and 2GB RAM. The model is a 2668-LG2. After checking various sites, including the IBM main site, I recently went ahead and bought a new hard drive (although, second hand), as it showed as being compatible with this model.
I tried installling the drive and the first message I got was 'Error 0200 Failure Fixed Disk 1' and it suggested I went to system setup, which I did and couldn't see the hdd at all. Then I tried to load the OS and once it went through the hardware config and initial stages of Windows Setup, it says 'Setup did not find any hard disk installed in you computer' etc...
The hdd I have just bought is a Seagate Momentus 5400.3 ST9160821A. I made the presumption that a firmware upgrade wouldn't work, as it would have to be able to see the disk in order to know whether it needs an upgrade. Am I wrong?
Any help would be very much appreciated!
I tried installling the drive and the first message I got was 'Error 0200 Failure Fixed Disk 1' and it suggested I went to system setup, which I did and couldn't see the hdd at all. Then I tried to load the OS and once it went through the hardware config and initial stages of Windows Setup, it says 'Setup did not find any hard disk installed in you computer' etc...
The hdd I have just bought is a Seagate Momentus 5400.3 ST9160821A. I made the presumption that a firmware upgrade wouldn't work, as it would have to be able to see the disk in order to know whether it needs an upgrade. Am I wrong?
Any help would be very much appreciated!
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
A few obvious items to check. Is the drive properly seated? Is it inserted in the correct orientation? I have slipped up in the past in both respects, and driven (no pun intended) myself crazy trying to troublshoot. Check for bent pins. Finally, check the drive on another machine if you can, to be sure it's good.
Mike
Mike
Current: 2 x W520 ET, 3 x X220 i7, T420, X230 i5, T420s, MacbookPro, Dell Venue 11 Pro
Past: IBM5150-8088 500 600E 600X T20 T21 5xT23 X30 3xX31 X32 T40 T42 3xT43 T43p SL510 T60p X60T X60s T61 2xT400 T410si T400s T500-3.06GHz X200 X201 X220i5 X220i7 2xT420s
Past: IBM5150-8088 500 600E 600X T20 T21 5xT23 X30 3xX31 X32 T40 T42 3xT43 T43p SL510 T60p X60T X60s T61 2xT400 T410si T400s T500-3.06GHz X200 X201 X220i5 X220i7 2xT420s
-
RealBlackStuff
- Admin
- Posts: 17517
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Welcome to the forum.
That's a 160GB IDE drive, which should work.
Transfer the caddy and screws from the 'old' hard disk.
Then turn the HD over (label to the bottom) and insert it.
You will get a 2010 error for non-approved HD, but if you have the latest BIOS, there's an option in it to auto-continue.
With previous BIOS versions you need to press Esc to continue.
It will not do any harm to the laptop, just one annoying beep at boot and a wait of a few seconds.
Can be ignored.
That's a 160GB IDE drive, which should work.
Transfer the caddy and screws from the 'old' hard disk.
Then turn the HD over (label to the bottom) and insert it.
You will get a 2010 error for non-approved HD, but if you have the latest BIOS, there's an option in it to auto-continue.
With previous BIOS versions you need to press Esc to continue.
It will not do any harm to the laptop, just one annoying beep at boot and a wait of a few seconds.
Can be ignored.
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
@ mpcook - Thanks for the reply. I did actually check that the hard drive was seated properly and that the pins were not bent, as I too have come up against the same issues in the past. Unfortunately though, the only other laptop I have uses a SATA HDD, so I cannot test the Seagate IDE drive in it. This is the most frustrating part, as I could very quickly determine whether or not the drive is a dud.
@RealBlackStuff - Thanks for the advice, but again, I had tried all of the things you have suggested. I have owned Thinkpads in the past and have experienced the infamous 2010 error and was able to overcome it with no real issues, but this is different. This is a 0200 Failure Fixed Disk 1 error, and the laptop just doesn't seem to see the drive. When going into the BIOS (Version 1.29 (1YET65WW)) >Startup>Boot> in the Boot priority order list, it just shows IDE HDD0: There is no label showing at all.
Any other ideas?
@RealBlackStuff - Thanks for the advice, but again, I had tried all of the things you have suggested. I have owned Thinkpads in the past and have experienced the infamous 2010 error and was able to overcome it with no real issues, but this is different. This is a 0200 Failure Fixed Disk 1 error, and the laptop just doesn't seem to see the drive. When going into the BIOS (Version 1.29 (1YET65WW)) >Startup>Boot> in the Boot priority order list, it just shows IDE HDD0: There is no label showing at all.
Any other ideas?
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Hold the laptop upside-down when seating the hard drive, otherwise you may have it seated one row of pins off... Been there, done that.
DKB
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Thanks GomJabbar, but still not being seen.
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Put the old drive back in. If it still works the new drive is bad.
-
tfflivemb2
- Moderator1

- Posts: 5532
- Joined: Thu Sep 01, 2005 1:17 pm
- Location: Wisconsin
- Contact:
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
+1Harryc wrote:Put the old drive back in. If it still works the new drive is bad.
-
ajkula66
- SuperUserGeorge

- Posts: 15740
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Given that this is a T43p that we're discussing, I'm betting on a bad SouthBridge...and hoping, for once, that I'm wrong.
There's a thread by kajencik somewhere describing this type of behaviour which ended up in a planar swap...
if the old hard drive works fine, then I'm wrong and you need a new "new" hard drive.
Good luck.
There's a thread by kajencik somewhere describing this type of behaviour which ended up in a planar swap...
if the old hard drive works fine, then I'm wrong and you need a new "new" hard drive.
Good luck.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Right, to all those that suggested reseating the drive, I apologise. Very embarrased! After trying to install the old drive several times and finding that it worked intermittently, I could only come to the conclusion that it must be a sensitive IDE connection, so after a few more forceful attempts at installing the new drive, it was finally recognised. I daren't take it out now though!
So thanks again for all of your help and again, apologies for the schoolboy error!
So thanks again for all of your help and again, apologies for the schoolboy error!
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
No reason to be embarassed! This has happened to many of us TP'ers! This is great news so happy to hear it. Good luck with your Thinkpad!
Mike
Mike
Current: 2 x W520 ET, 3 x X220 i7, T420, X230 i5, T420s, MacbookPro, Dell Venue 11 Pro
Past: IBM5150-8088 500 600E 600X T20 T21 5xT23 X30 3xX31 X32 T40 T42 3xT43 T43p SL510 T60p X60T X60s T61 2xT400 T410si T400s T500-3.06GHz X200 X201 X220i5 X220i7 2xT420s
Past: IBM5150-8088 500 600E 600X T20 T21 5xT23 X30 3xX31 X32 T40 T42 3xT43 T43p SL510 T60p X60T X60s T61 2xT400 T410si T400s T500-3.06GHz X200 X201 X220i5 X220i7 2xT420s
-
tfflivemb2
- Moderator1

- Posts: 5532
- Joined: Thu Sep 01, 2005 1:17 pm
- Location: Wisconsin
- Contact:
Re: 'Error 0200 Failure Fixed Disk 1' when installing new HDD.
Absolutely!mpcook wrote:No reason to be embarassed! This has happened to many of us TP'ers!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
X270: M.2 disk for installing 32-bit Windows?
by Edward Mendelson » Wed Jun 21, 2017 10:06 am » in ThinkPad X230 and later Series - 4 Replies
- 147 Views
-
Last post by Edward Mendelson
Wed Jun 21, 2017 12:27 pm
-
-
-
Hard Disk bay Vs Ultrabay disk caddy
by karotlopj » Fri Jun 30, 2017 2:37 am » in ThinkPad T4x Series - 3 Replies
- 71 Views
-
Last post by shawross
Fri Jun 30, 2017 6:51 pm
-
-
-
T440s 2 quarks... can they be fixed?
by Whitieiii » Sat Jan 21, 2017 9:23 pm » in ThinkPad T430/T530 and later Series - 12 Replies
- 1100 Views
-
Last post by Whitieiii
Tue Jan 31, 2017 1:52 am
-
-
-
It seems as Lenovo finally noticed and fixed the low PWM frequency issue
by Puppy » Sun Apr 16, 2017 6:28 am » in GENERAL ThinkPad News/Comments & Questions - 2 Replies
- 521 Views
-
Last post by Thinkpad4by3
Sun May 14, 2017 9:07 pm
-
Who is online
Users browsing this forum: No registered users and 4 guests





