x31 with dock issues

X2/X3/X4x series specific matters only
Post Reply
Message
Author
spt87a
Posts: 1
Joined: Thu Dec 23, 2010 4:21 pm
Location: Sandwich, MA

x31 with dock issues

#1 Post by spt87a » Thu Jan 13, 2011 12:16 am

Hi,

I have an x31 running Windows 7. It runs 100% fine either standalone or attached to an Ultrabase.

When connected to a Dock (2631), Dock 2 (2877) or a port replicator things go awry. If docked to any of the above when powered off, when attempting to power on the BIOS complains that the mini-PCI wireless card is not authorized that there are PCI resource conflicts with the serial port, on board ethernet port and the docking station ethernet port. It then stops and does not boot. If powered on first, then docked, the laptop will get power from the dock/replicator but none of the connections on the dock/replicator work including video, ethernet, mouse, keyboard, etc.

Any ideas? Doesn't seem to be a Windows 7 issue since the BIOS does the complaining. I did ensure the BIOS on the x31 is the latest release and set the config to factory defaults. I did fool with the PCI interrupt settings a bit without luck. Since the Ultrabase works I assume the docking connector on the x31 is healthy. Also tried it with the serial port both disabled and enabled in the BIOS.

Thanks,

Scott

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: x31 with dock issues

#2 Post by Harryc » Thu Jan 13, 2011 4:50 am

Well, a simple PD technique would be to pull the mPCI card and observe docked behavior.
Use the maintenance manual for removals - http://www-307.ibm.com/pc/support/site. ... 44018.html

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X2/X3/X4x Series incl. X41 Tablet”

Who is online

Users browsing this forum: No registered users and 2 guests