R51 Turn Off when installing windows xp or 7

Message

ciberdiego · #1 Post by **ciberdiego** » Wed Feb 16, 2011 2:05 pm

Hello,
i have an ibm thinkpad r51,
The laptop was turned off while working on windows,
I inserted a Windows CD to install, but when the installation starts off when finished loading drivers, I inserted a CD of Windows 7 and did the same, also with an ERD COMMANDER,but with a hirenscd not switch off, I changed the hard drive and same thing happens, I cleaned the fans, I alternated the 2 ram memory,
Always turns off at the same moment.
I can only think that the motherboard is bad.
can you help?
thanks

#2 Post by **Harryc** » Wed Feb 16, 2011 2:10 pm

Run tpfancontrol in BIOS mode, and tell us what the CPU and GPU temps are before the unit shuts off.
http://www.staff.uni-marburg.de/~schmitzr/donate.html

ciberdiego · #3 Post by **ciberdiego** » Wed Feb 16, 2011 2:18 pm

I think that utility is for windows, I can not enter windows, I can not install it.

or tpfancontrol has an liveboot utility?

#4 Post by **Harryc** » Wed Feb 16, 2011 2:27 pm

I can barely understand your first post. No tpfancontrol does not have a live utility.

craigmontHunter · #5 Post by **craigmontHunter** » Wed Feb 16, 2011 3:11 pm

Yes, if you have an ATI board, it is entirely possible that the board warms up at a fairly consistant rate so that the system hangs at the same time every time (I guess the southbridge could provide simmilar issues?). Otherwise, you may have issues with you cd drive or media. Try booting a linux live cd (I reccomend ubuntu of linux mint - these are probably the most used linux versions on this site), then see if that loads properly. Please report back your 7-character model so that we can determine the specs of your system.

ciberdiego · #6 Post by **ciberdiego** » Thu Feb 17, 2011 4:15 am

i have an 1829-R6G

i tried without the hard disk,
and new memory,
the same results,

with a live cd (Windows PE) works fine... 4 hours!!!
but when start the windows installacion... it power off...

Help, please!

craigmontHunter · #7 Post by **craigmontHunter** » Thu Feb 17, 2011 8:10 am

Download the pc doctor live cd and run all the tests, see if that does anything. The winpe live cd may not stress the hard drive enough.

#8 Post by **RealBlackStuff** » Thu Feb 17, 2011 11:08 am

Does the screen have any problems, like flickering, distorted picture?
Do the USB ports still function at speed of USB2.0?

ciberdiego · #9 Post by **ciberdiego** » Thu Feb 17, 2011 11:12 am

i tried with another hard disk, and without hard disk,
same result, power off when is going to display the windows installacion (when you have to press enter and F8)
always the same moment.

R51 Turn Off when installing windows xp or 7

R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Re: R51 Turn Off when installing windows xp or 7

Who is online