(credit to Michael J Moffitt)


Bibin wrote:Howdy, that's my image so I'll comment on it. The data plug on the top is simply a severely cut-down standard SATA data cable. The bottom is a chopped down Molex-to-SATA power adapter, which I used as the red and black wires were already easy to access as they were.
RealBlackStuff wrote:Look at the (bigger of the two) connector-picture I posted in this thread: http://forum.thinkpads.com/viewtopic.ph ... 08&start=0
That eBay seller has none left, but there are similar (or identical, can't see) on eBay:
http://shop.ebay.com/i.html?_kw=Drive&_ ... =Connector
Check the one from USA-seller Nycom-Tech, looks very similar:
http://cgi.ebay.com/HP-DV6000-2-5-SATA- ... 0532060260
When you remove the IDE connector, leave the metal studs. Then modify the long end of the connector (left on my above picture) by drilling a matching hole for the stud and sawing off the rest.
You need some spacers to lift the connector off the mobo, but a SATA hard drive will then fit exactly in place of the old IDE drive.
Users browsing this forum: hengster and 2 guests