Just bought a X200 refurb and have a problem...

X200, X201, X220 (including equivalent tablet models) and X300, X301 series specific matters only.
Post Reply
Message
Author
JustaNewbie
Posts: 4
Joined: Wed Apr 27, 2011 1:46 pm
Location: Vancouver, Canada

Just bought a X200 refurb and have a problem...

#1 Post by JustaNewbie » Wed Apr 27, 2011 1:54 pm

As per thread title....

Just received a X200 refurb from IBM and encountered a problem. X200 worked fine initially (including charging up the battery) but it seems to have stopped working from AC power (same day I received laptop).

X200 now only boots up using battery (even when plugged in) - and battery isn't being re-charged. Tried plugging it in via the dock but still the same results; X200 would only boot up using battery power. Could an AC Adapter die out so quickly after just a few hours of use? (granted AC Adapter was also labeled a refurb product).

Visually, the AC Adapter itself doesn't appear to show any damages on the outside (nor any obvious signs like emitting a burnt smell).

Or am I missing something? Would appreciate some suggestions.

Thanks in advance!

edit:
The AC Adapter I got was the 65W one.

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: Just bought a X200 refurb and have a problem...

#2 Post by Harryc » Wed Apr 27, 2011 2:57 pm

Do you have a multimeter? You should be able to measure 20vDC at the end of the tip, + or - 5%. To quote 'Ray' -
The "center pin" does not deliver any voltage; it's the metal wall inside the plug that has the +20V with respect to the metal shell on the outside of the plug. See this: http://www.kawakami-ca.com/images/20v_dc_plug.jpg

JustaNewbie
Posts: 4
Joined: Wed Apr 27, 2011 1:46 pm
Location: Vancouver, Canada

Re: Just bought a X200 refurb and have a problem...

#3 Post by JustaNewbie » Wed Apr 27, 2011 3:14 pm

Thanks for the advice. Not sure why I didn't think to try that out myself.

JustaNewbie
Posts: 4
Joined: Wed Apr 27, 2011 1:46 pm
Location: Vancouver, Canada

Re: Just bought a X200 refurb and have a problem...

#4 Post by JustaNewbie » Fri Apr 29, 2011 12:52 pm

Looks like the AC Adapter is toast (no readings at all on the multimeter - checked another GOOD AC Adapter from another laptop I have just to make sure I was doing it right :mrgreen: ).

Phoned IBM to asked for a replacement - but will likely get another old refurb AC Adapter.

Any suggestions for a 3rd party one I could purchase new or is better to stick with a genuine Lenovo branded AC Adapter for the X200?

jeffm
Freshman Member
Posts: 112
Joined: Wed Feb 07, 2007 9:13 pm
Location: Columbia, SC
Contact:

Re: Just bought a X200 refurb and have a problem...

#5 Post by jeffm » Fri Apr 29, 2011 2:11 pm

Try the Lenovo 90W UltraSlim AC/DC Combo Adapter. I just got one of these today - very slim, charges my phone and laptop at the same time, super cool.

http://www-307.ibm.com/pc/support/site. ... 72900.html

JustaNewbie
Posts: 4
Joined: Wed Apr 27, 2011 1:46 pm
Location: Vancouver, Canada

Re: Just bought a X200 refurb and have a problem...

#6 Post by JustaNewbie » Mon May 02, 2011 11:45 pm

Received the replacement AC Adapter from IBM today (that was pretty fast service). Doesn't appear to have a date on it (defective/crapped out AC Adapter was actually 1+ year *older* than the X200 unit itself!).

As suspected, it was the AC Adapter that was the problem; first time I've ever had one become defective (and I've had a number of laptops including a still operational Thinkpad T22!). Re-charging battery right now as I post.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X200/201/220 and X300/301 Series”

Who is online

Users browsing this forum: No registered users and 3 guests