WUXGA in a T43 or R51

Message

roguetrooper · #1 Post by **roguetrooper** » Wed Jul 27, 2011 12:42 pm

Hi there

For the last 4 years I have been using a 15.4" WUXGA (1920x1200) equipped Dell D800, which replaced a T43p.

The D800 has finally failed (but provided superb service) and I am recycling the components.

The 2.5" Drive and 2 x 512MB SO DIMMS went into an 15" R51 I have (Intel GPU).

I still have that beautiful WUXGA screen 15.4".

Can I use this in the R51 (15" Intel GPU) or the T43 I am waiting to arrive (GPU unknown) or even the A31?

It would be so great if I could. In fact it would really be a great thing for me. But not sure if it is even possible!

Neil · #2 Post by **Neil** » Wed Jul 27, 2011 12:51 pm

roguetrooper wrote:Can I use this in the R51 (15" Intel GPU) or the T43 I am waiting to arrive (GPU unknown) or even the A31?

How do you propose to fit a wide panel in one of those 4x3 lids? Even if the cables were compatible, which I doubt they are, I can't imagine any way to make it physically fit. Plus the R51 GPU will only support XGA, so that's out anyway.

roguetrooper · #3 Post by **roguetrooper** » Wed Jul 27, 2011 1:03 pm

oops I am a bit silly.

I just compared the size. it looks like a no go. I was focusing more on the 15.4" aspect, but you are right. Highly disappointing.

Thankyou anyhow. It looks like I'll be sticking with XGA for the present!

ajkula66 · #4 Post by **ajkula66** » Wed Jul 27, 2011 9:38 pm

You have an A31 which will run SXGA+ or UXGA screen, both of these IPS...doesn't get much better than that.

If your T43 is a 15" ATi unit, it can do the same.

#5 Post by **ZaZ** » Thu Jul 28, 2011 1:53 am

It's been done the other way.

WUXGA in a T43 or R51

WUXGA in a T43 or R51

Re: WUXGA in a T43 or R51

Re: WUXGA in a T43 or R51

Re: WUXGA in a T43 or R51

Re: WUXGA in a T43 or R51

Who is online