How to reinstall my W520 to factory default after format C ?
How to reinstall my W520 to factory default after format C ?
Here is my problem :
1. I boot for the first time my ThinkPad W520 and install Windows Seven
2. I see that there is only 1 partition, and use a partition manager to split C:/
3. It doesn't work and my C partition is corrupted
4. I quick format C:/
5. I split it in two partition C and D.
So now, I have the partition with SYSTEM_DRV, my empty C:/, the new empty D:/, and a partition with the Recovery Data on it.
And now, is there a way for me to reinstall my computer using factory defaults ?
Knowing that the Recovery agent at the boot doesn't work and that I have no recovery or installation CD whatsoever.
A little bit of help would most welcome.
Thanks !
1. I boot for the first time my ThinkPad W520 and install Windows Seven
2. I see that there is only 1 partition, and use a partition manager to split C:/
3. It doesn't work and my C partition is corrupted
4. I quick format C:/
5. I split it in two partition C and D.
So now, I have the partition with SYSTEM_DRV, my empty C:/, the new empty D:/, and a partition with the Recovery Data on it.
And now, is there a way for me to reinstall my computer using factory defaults ?
Knowing that the Recovery agent at the boot doesn't work and that I have no recovery or installation CD whatsoever.
A little bit of help would most welcome.
Thanks !
-
ausmike
- Senior Member

- Posts: 976
- Joined: Tue Oct 27, 2009 11:16 am
- Location: ~ 3Million Mile Club Member~~
Re: How to reinstall my W520 to factory default after format C ?
hi there
Not sure which country your based @
but CALL Lenovo tech Support, and ask them to send you a RECOVERY DVD
they wll, free of charge ( as your laptop should be - still under warranty)
Also- When you use PM or other partition tools in Win OS (AFAIK....they messup BOOT_SECTOR & other HD stuff) ,,,, the data generaly is still there .... if you have LINUX LIVE CD , boot using that and that will show you the Lenovo FACTORY RESERVE PARTITION, - from which you "CAN DO" reinstall. BUT!!-- but when/IF you reinstall from recovery partition - it will wipe out the WHOLE HARD DRIVE , and you have will to re-create what you wanted to do ( thus you might get the same issue again)
I would recommend - get a 2nd HARD DRIVE ADAPTOR and install your 'other' needs there. W520 will even boot from that 2nd drive!!
Cheers - hope this is helpfull
Not sure which country your based @
but CALL Lenovo tech Support, and ask them to send you a RECOVERY DVD
they wll, free of charge ( as your laptop should be - still under warranty)
Also- When you use PM or other partition tools in Win OS (AFAIK....they messup BOOT_SECTOR & other HD stuff) ,,,, the data generaly is still there .... if you have LINUX LIVE CD , boot using that and that will show you the Lenovo FACTORY RESERVE PARTITION, - from which you "CAN DO" reinstall. BUT!!-- but when/IF you reinstall from recovery partition - it will wipe out the WHOLE HARD DRIVE , and you have will to re-create what you wanted to do ( thus you might get the same issue again)
I would recommend - get a 2nd HARD DRIVE ADAPTOR and install your 'other' needs there. W520 will even boot from that 2nd drive!!
Cheers - hope this is helpfull
Work: None - Retired ! Yipee!! ~~Older/Hm use:Asus Zenbook i7FHD~~ w701ds CTO;W520cto;T61P-IPSmodels; T43P,...&700Tstill going strong!! DEC Alpha Series OS: Win7x64; OSX; SuSe Linux; RedHat~~
-
Colonel O'Neill
- ThinkPadder

- Posts: 1359
- Joined: Tue Oct 27, 2009 8:03 am
- Location: Vancouver
Re: How to reinstall my W520 to factory default after format C ?
Did you order your computer without Windows? If not, then you should've made recovery disks before formatting. If you didn't, then you'll have to pay Lenovo for a set.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen & MB168B+
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Re: How to reinstall my W520 to factory default after format C ?
OK. I will simply call them, so.
Thank you guys for your answer.
And by the way, I ordered the computer with Seven.
Thx again.
Yosekan
Thank you guys for your answer.
And by the way, I ordered the computer with Seven.
Thx again.
Yosekan
-
bill bolton
- Admin

- Posts: 3848
- Joined: Thu Sep 01, 2005 10:09 am
- Location: Sydney, Australia - Best Address on Earth!
Re: How to reinstall my W520 to factory default after format C ?
Not free of charge in many countries... warranty has nothing to do with it.ausmike wrote:they wll, free of charge ( as your laptop should be - still under warranty)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
CANNOT FORMAT 2tb usb 2.5" seagate sata hard drive ON T420S WITH WINDOWS 10
by MontanaKitty » Sat Jan 21, 2017 12:28 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 3 Replies
- 855 Views
-
Last post by RealBlackStuff
Mon Jan 23, 2017 9:40 am
-
-
-
SOLD: T61 4x3 format - $100 OBO
by BobA » Thu Feb 02, 2017 12:06 am » in Marketplace - Forum Members only - 0 Replies
- 362 Views
-
Last post by BobA
Thu Feb 02, 2017 12:06 am
-
-
-
Analog (VGA) external monitor as default screen on W530
by FryPpy » Sat Apr 22, 2017 4:36 pm » in ThinkPad W530 and later Series - 0 Replies
- 143 Views
-
Last post by FryPpy
Sat Apr 22, 2017 4:36 pm
-
-
-
Thinkpad W520 screen replacement. Suggestion on after market screens.
by LoneTraveler » Thu Jun 22, 2017 3:56 pm » in ThinkPad W500/510/520 and W7x0 Series - 10 Replies
- 342 Views
-
Last post by LoneTraveler
Sun Jun 25, 2017 5:38 am
-
Who is online
Users browsing this forum: No registered users and 5 guests



