Different heatsink for 920xm on W510?

W500/510/520 and W700/710 series specific matters only
Post Reply
Message
Author
sirfergy
Posts: 9
Joined: Tue Sep 15, 2009 1:49 pm
Location: Renton, WA

Different heatsink for 920xm on W510?

#1 Post by sirfergy » Thu Sep 01, 2011 11:49 pm

I'd like to upgrade my W510 from a 720 to the 920. Do I need to upgrade anything other than the CPU?

Thanks1

QFoam
Sophomore Member
Posts: 144
Joined: Thu Oct 09, 2008 3:09 pm
Location: Los Angeles, CA
Contact:

Re: Different heatsink for 920xm on W510?

#2 Post by QFoam » Fri Sep 02, 2011 2:11 am

W700 T9600 @2.8GHz Vista64
8GBram 2GBTurbo 160GB+320GB @7.2k
17" 1920x1200 QuadroFX 3700M/1GB
Blu-ray Ultrabay
ThinkPad W700 Resources Page

Adda
Senior Member
Senior Member
Posts: 685
Joined: Fri Dec 04, 2009 1:49 pm
Location: Nørresundby, Denmark

Re: Different heatsink for 920xm on W510?

#3 Post by Adda » Fri Sep 02, 2011 5:46 pm

If you plan on using it's performance then don't do it.
55w is too much for the W510 cooler if the video card is under load too, it barely can cool the CPU alone.

ThinkPad A30
Pentium III-M 933MHz
Crucial 2x256MB 133MHz CL2
Mobility Radeon 16MB
15" UXGA FlexView
Zheino Classic A 32GB
Samsung SpinPoint M5S 160GB
NEC DVD+-RW ND-6650A
Broadcom MiniPCI BCM43222 802.11n Dual Band
AKE BC168 USB 2.0
26P8287 203 "Malaysia"
46L4697
02K6898
02K6753

thitiv
Freshman Member
Posts: 52
Joined: Wed Mar 21, 2007 4:23 am
Location: Bangkok, Thailand
Contact:

Re: Different heatsink for 920xm on W510?

#4 Post by thitiv » Sat Sep 03, 2011 2:30 pm

The 920xm works perfectly in a W510. I had mine for almost a year and I just sold it today. It would be nice if you apply high-quality thermal interface compound during the installation.
ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Ultimate-N 6300 | F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | Battery 55++ & Battery 27++
Twitter @thitiv | Work

sirfergy
Posts: 9
Joined: Tue Sep 15, 2009 1:49 pm
Location: Renton, WA

Re: Different heatsink for 920xm on W510?

#5 Post by sirfergy » Tue Sep 06, 2011 2:19 pm

thitiv wrote:The 920xm works perfectly in a W510. I had mine for almost a year and I just sold it today. It would be nice if you apply high-quality thermal interface compound during the installation.
Did yours have a different heatsink than other W510s?

thitiv
Freshman Member
Posts: 52
Joined: Wed Mar 21, 2007 4:23 am
Location: Bangkok, Thailand
Contact:

Re: Different heatsink for 920xm on W510?

#6 Post by thitiv » Tue Sep 06, 2011 6:30 pm

sirfergy wrote: Did yours have a different heatsink than other W510s?
No, I didn't because I "changed" my CPU from a 720QM to a 920XM by myself. The stock CPU that came with the machine was a 720QM.
ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Ultimate-N 6300 | F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | Battery 55++ & Battery 27++
Twitter @thitiv | Work

sirfergy
Posts: 9
Joined: Tue Sep 15, 2009 1:49 pm
Location: Renton, WA

Re: Different heatsink for 920xm on W510?

#7 Post by sirfergy » Tue Sep 06, 2011 11:28 pm

Awesome, exactly what I wanted to hear.

thitiv
Freshman Member
Posts: 52
Joined: Wed Mar 21, 2007 4:23 am
Location: Bangkok, Thailand
Contact:

Re: Different heatsink for 920xm on W510?

#8 Post by thitiv » Wed Sep 07, 2011 1:43 am

sirfergy wrote:Awesome, exactly what I wanted to hear.
Make sure you

(1) use a decent thermal paste like the Arctic MX-4,
(2) apply the thermal paste properly, not too much and not too little and no air bubble inside
(3) have read this thread http://goo.gl/vMigE where so many people share their experience overclocking the 920xm

Enjoy!
ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Ultimate-N 6300 | F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | Battery 55++ & Battery 27++
Twitter @thitiv | Work

Adda
Senior Member
Senior Member
Posts: 685
Joined: Fri Dec 04, 2009 1:49 pm
Location: Nørresundby, Denmark

Re: Different heatsink for 920xm on W510?

#9 Post by Adda » Wed Sep 07, 2011 7:29 am

And lastly make sure you don't put load on the the CPU and GPU simultaneously and watch out for hot weather.
No matter what you do, the W510 will crash and/or throttle if pushed hard with a 920XM CPU installed.

This thread documents the problem in great detail, and shows how to replicate the error:
http://forum.thinkpads.com/viewtopic.php?f=48&t=90854

ThinkPad A30
Pentium III-M 933MHz
Crucial 2x256MB 133MHz CL2
Mobility Radeon 16MB
15" UXGA FlexView
Zheino Classic A 32GB
Samsung SpinPoint M5S 160GB
NEC DVD+-RW ND-6650A
Broadcom MiniPCI BCM43222 802.11n Dual Band
AKE BC168 USB 2.0
26P8287 203 "Malaysia"
46L4697
02K6898
02K6753

sirfergy
Posts: 9
Joined: Tue Sep 15, 2009 1:49 pm
Location: Renton, WA

Re: Different heatsink for 920xm on W510?

#10 Post by sirfergy » Wed Sep 07, 2011 10:24 am

Thanks for the tips. Wasn't the W510 sold with a 920XM? If so, shouldn't it just work or did they just do a bad job?

thitiv
Freshman Member
Posts: 52
Joined: Wed Mar 21, 2007 4:23 am
Location: Bangkok, Thailand
Contact:

Re: Different heatsink for 920xm on W510?

#11 Post by thitiv » Wed Sep 07, 2011 11:07 am

sirfergy wrote:Thanks for the tips. Wasn't the W510 sold with a 920XM? If so, shouldn't it just work or did they just do a bad job?
They are sold with 920XM OEM but they are not supposed to be overclocked per original design of Lenovo :) From my experience, non-overclocked systems can sustain continued overnight Full Stress torture tests by Lenovo's System Health and Diagnostics utility; whereas the most stable overclocked one can go through at most 10 rounds of Full Stress tests.
ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Ultimate-N 6300 | F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | Battery 55++ & Battery 27++
Twitter @thitiv | Work

Adda
Senior Member
Senior Member
Posts: 685
Joined: Fri Dec 04, 2009 1:49 pm
Location: Nørresundby, Denmark

Re: Different heatsink for 920xm on W510?

#12 Post by Adda » Wed Sep 07, 2011 11:15 am

Both the W510 and W520 have questionable cooling.
It seems Lenovo didn't take the extra heat generated by quad core CPU's seriously, and the W510 cooler often doesn't fit right.
The W510 cooler is sort of good enough for 45w CPU's (up to 840QM), just use good cooler paste and make sure the cooler fits right.
Hot weather can still cause trouble, but disabling hyper-threading might fix that as it reduces heat.
The W520 has a similar cooler to the W510, as there is the same amount of room for a cooler in both these machines.
Still Lenovo expects the W520 cooler to handle a 55w CPU AND a 55w GPU, if you have the fastest model, while the W510 struggles with a 45w CPU and 35w GPU.

If you don't believe me go test your system as described in the thread I linked to.

FurMark alone can be a good test too, just run it in extreme burning mode, open the task manager use the "set affinity" feature to test furmark on one core at the time, test all cores to see if all are stable under load while the GPU is under load.

Lenovo's stability tests are flawed, they don't put load on CPU and GPU simultaneously for an extended period of time.

Edit: and when testing with furmark, don't stop until the temperatures have stabilized.

ThinkPad A30
Pentium III-M 933MHz
Crucial 2x256MB 133MHz CL2
Mobility Radeon 16MB
15" UXGA FlexView
Zheino Classic A 32GB
Samsung SpinPoint M5S 160GB
NEC DVD+-RW ND-6650A
Broadcom MiniPCI BCM43222 802.11n Dual Band
AKE BC168 USB 2.0
26P8287 203 "Malaysia"
46L4697
02K6898
02K6753

sirfergy
Posts: 9
Joined: Tue Sep 15, 2009 1:49 pm
Location: Renton, WA

Re: Different heatsink for 920xm on W510?

#13 Post by sirfergy » Wed Sep 07, 2011 11:40 am

So if you don't plan to overclock, does it make more sense to just get the 840QM? That has the same turbo-boost and cache as the 920XM but a slightly lower overall speed without turbo.

thitiv
Freshman Member
Posts: 52
Joined: Wed Mar 21, 2007 4:23 am
Location: Bangkok, Thailand
Contact:

Re: Different heatsink for 920xm on W510?

#14 Post by thitiv » Thu Sep 08, 2011 9:14 am

@sirfergy,

Get a W520 with a 2820qm CPU. My W520 + 2820qm runs faster than my former W510 + 920xm that was well overclocked.
ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Ultimate-N 6300 | F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | Battery 55++ & Battery 27++
Twitter @thitiv | Work

Adda
Senior Member
Senior Member
Posts: 685
Joined: Fri Dec 04, 2009 1:49 pm
Location: Nørresundby, Denmark

Re: Different heatsink for 920xm on W510?

#15 Post by Adda » Thu Sep 08, 2011 2:13 pm

thitiv wrote:@sirfergy,

Get a W520 with a 2820qm CPU. My W520 + 2820qm runs faster than my former W510 + 920xm that was well overclocked.
I agree that would probably be better, get one with a Quadro 1000m though.

ThinkPad A30
Pentium III-M 933MHz
Crucial 2x256MB 133MHz CL2
Mobility Radeon 16MB
15" UXGA FlexView
Zheino Classic A 32GB
Samsung SpinPoint M5S 160GB
NEC DVD+-RW ND-6650A
Broadcom MiniPCI BCM43222 802.11n Dual Band
AKE BC168 USB 2.0
26P8287 203 "Malaysia"
46L4697
02K6898
02K6753

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad W500/510/520 and W7x0 Series”

Who is online

Users browsing this forum: No registered users and 1 guest