Hi,
I have T41 thinkpad, which doesn't work. Here are the symptoms:
- without battery
- fan starts, power-on indicator works
- lcd blank, external monitor blank
- no peep
- when I take dimm out, it peeps correctly symptoms - --- --- -
- changed CPU, didn't fix the problem
- tested CMOS voltage 2.87
Is the motherboard faulty or something else?
T41 faulty?
T41 faulty?
T40 -> T40 -> T40 -> T41 -> X40 -> X41 -> T40 -> X60 -> X30 -> R40 -> T61
Re: T41 faulty?
Most likely the motherboard. Probably either the GPU or Southbridge (or both) BGA solder joints have failed.
I have a couple of T41 that perform something like that. If you want to do some testing, lift the keyboard and apply some pressure to the ATI chip. While holding pressure power it up. One of mine will still boot every time with pressure on the chip. Fails most of the time without. The other won't boot no matter where I push on the ATI chip or the Southbridge chip.
I have a couple of T41 that perform something like that. If you want to do some testing, lift the keyboard and apply some pressure to the ATI chip. While holding pressure power it up. One of mine will still boot every time with pressure on the chip. Fails most of the time without. The other won't boot no matter where I push on the ATI chip or the Southbridge chip.
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E
Re: T41 faulty?
Tested it. When I pressed southbridge it did post bios for external monitor and as soon as I lifted the pressure it went blank. I assume only way to fix it, is to change the motherboard?Neil wrote:Most likely the motherboard. Probably either the GPU or Southbridge (or both) BGA solder joints have failed.
I have a couple of T41 that perform something like that. If you want to do some testing, lift the keyboard and apply some pressure to the ATI chip. While holding pressure power it up. One of mine will still boot every time with pressure on the chip. Fails most of the time without. The other won't boot no matter where I push on the ATI chip or the Southbridge chip.
T40 -> T40 -> T40 -> T41 -> X40 -> X41 -> T40 -> X60 -> X30 -> R40 -> T61
Re: T41 faulty?
Forum member poshgeordie used to provide a professional repair service for these boards that are likely better than any replacement boards you might be able to find. But, I'm not sure if he is still doing it. Might want to try to contact him anyway.
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E
-
poshgeordie
- ThinkPadder

- Posts: 1101
- Joined: Sat Feb 09, 2008 6:19 pm
- Location: Newcastle upon Tyne, UK
- Contact:
Re: T41 faulty?
PM sent.jiopsi wrote:Tested it. When I pressed southbridge it did post bios for external monitor and as soon as I lifted the pressure it went blank. I assume only way to fix it, is to change the motherboard?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Wake up after suspend problem on T41 with new SSD on IDE2SATA controller
by Mac-Chatter » Sat Mar 04, 2017 6:10 am » in ThinkPad T4x Series - 0 Replies
- 1740 Views
-
Last post by Mac-Chatter
Sat Mar 04, 2017 6:10 am
-
-
-
WTT: T41 w/LCD lines + T61 broken ultranav key
by Raidriar » Wed Mar 22, 2017 10:47 am » in Marketplace - Forum Members only - 1 Replies
- 209 Views
-
Last post by kfzhu1229
Wed Mar 22, 2017 1:46 pm
-
-
- 2 Replies
- 281 Views
-
Last post by wujstefan
Sun Jun 04, 2017 1:39 pm
-
- 0 Replies
- 83 Views
-
Last post by karotlopj
Fri Jun 16, 2017 9:11 am
Who is online
Users browsing this forum: No registered users and 1 guest




