Hello,
I've seen an ebay seller selling the bottom base of t420 with the coa label on it. I was wondering if this can be legitimately used on my x301 or x61, to be upgraded to windows 10?
Cheers,
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Buying COA labeled chassis?
-
RealBlackStuff
- Admin Emeritus
- Posts: 24727
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: Buying COA labeled chassis?
Legal it is not quite.
Doable? Yes, even without COA.
However, to get the free W10 (until July 29, 2016), you first have to install W7 (preferably W7 Pro) on each machine and activate it, then upgrade.
Any machine with Slic2.1 in BIOS should automatically activate Vista and/or W7 when using Lenovo Recovery disks.
For X61, install Middleton's BIOS: http://ali.dj/blog/sata-ii-support-for- ... 61-x61-r61
For X301, see this: http://forums.mydigitallife.info/thread ... ad/page420
Can't discuss this any further.
Doable? Yes, even without COA.
However, to get the free W10 (until July 29, 2016), you first have to install W7 (preferably W7 Pro) on each machine and activate it, then upgrade.
Any machine with Slic2.1 in BIOS should automatically activate Vista and/or W7 when using Lenovo Recovery disks.
For X61, install Middleton's BIOS: http://ali.dj/blog/sata-ii-support-for- ... 61-x61-r61
For X301, see this: http://forums.mydigitallife.info/thread ... ad/page420
Can't discuss this any further.
Lovely day for a Guinness! (The Real Black Stuff)
But I actually prefer Murphy's from Cork!
But I actually prefer Murphy's from Cork!
-
crashnburn
- ThinkPadder

- Posts: 1728
- Joined: Sat Apr 22, 2006 4:26 pm
- Location: TX, USA & Bombay, India
Re: Buying COA labeled chassis?
Ways to work around 
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)
Re: Buying COA labeled chassis?
Since the Windows 10 1511 release from last fall, you just have to enter the product key on the COA to activate Windows 10. Installing Windows 7 is not necessary. That being said, one thing I'm not sure about is whether that product key can be used for Windows 7 afterwards. I would guess not and would use it for Windows 7 before Windows 10. The COA will work on both OSes as long as nobody has used it before. I used the COA on my X201 to activate VMs for both Windows 7 and 10.
Upgrading a SLIC table activated OEM install of Windows 7 will also work and the COA product key will still be available. One of the nice things about buying used Thinkpads is that you usually get a product key that can still be used to activate a copy of Windows. Not totally legal according to the EULA but it always works. In the case of putting a VM in the original machine and using the Windows product key to activate it, that is legal as far as I know because the OEM license is tied to the hardware and that applies to a VM in that hardware.
Upgrading a SLIC table activated OEM install of Windows 7 will also work and the COA product key will still be available. One of the nice things about buying used Thinkpads is that you usually get a product key that can still be used to activate a copy of Windows. Not totally legal according to the EULA but it always works. In the case of putting a VM in the original machine and using the Windows product key to activate it, that is legal as far as I know because the OEM license is tied to the hardware and that applies to a VM in that hardware.
I've got a T580, 2 W500s, a W520, an X201T, an X220T, an 3 X61Ts, a 15" T60, a 14" T60P, a 15" UXGA T60P, a 15" T42p a W701, and my first Thinkpad, a 770X.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
W530 motherboard in W520 chassis?
by alalalalysa » Fri Nov 21, 2025 5:16 am » in ThinkPad W500/W510/W520 and W700/W701 Series - 2 Replies
- 9579 Views
-
Last post by dcfbf
Fri Nov 21, 2025 11:30 am
-
-
-
What chassis modifications exactly are needed for T601F?
by dcfbf » Sat Nov 22, 2025 7:57 pm » in ThinkPad T60/T61 Series - 11 Replies
- 18584 Views
-
Last post by dcfbf
Mon Nov 24, 2025 2:27 pm
-
-
-
can i swap the display + lid from an x220tablet to a x230 tablet chassis?
by rezenee » Wed Jan 21, 2026 8:03 am » in ThinkPad X200/X201/X220 and X300/X301 Series - 0 Replies
- 5615 Views
-
Last post by rezenee
Wed Jan 21, 2026 8:03 am
-
-
-
First steps after buying a used Thinkpad
by Thinkpad2024 » Tue Nov 18, 2025 3:55 pm » in ** HOW TOs & FAQs ** - 3 Replies
- 9505 Views
-
Last post by dcfbf
Tue Nov 18, 2025 8:26 pm
-
Who is online
Users browsing this forum: No registered users and 46 guests




