http://img210.imageshack.us/img210/5284 ... ostic9.jpg
http://img211.imageshack.us/img211/8266 ... ostgp4.jpg
http://img211.imageshack.us/img211/8440 ... ostjm0.jpg
http://img210.imageshack.us/img210/3379 ... ostmh6.jpg
so I prepared myself for the need of a copper plate to seal the gap between the GPU and the heatsink, but yet it turned out that mine didn't have one. Not only that, but also the laptop came with thermal paste already put on from the factory ... duh ... so it kinda made my work seem like a wasted time.
but not really. I removed the factory compound, and put the one that I bought for the job - Noctua NT-H1 ... good stuff .. or to be exact - the best in the market
notice that the laptop also has a thermal pad between the heatsink and the keyboard, so it uses the keypad as a heat sink as well
Results - my GPU temperatures dropped by 2 to 3 deg C over the factory thermal paste. Yey
the video card is working at 648/900 (GPU/memory).
the test - gamming on C&C 3 Kane edition, at 1400x1050 with max detail. The performance difference - like a lot
the laptop used to idle at 50 deg C, and now it idles at about 47 deg C.
However, if you happen to have one of those laptops, you don't have to open it to do all that work just for 2 -3 deg drop.
temperatures and overclocking done by RivaTuner
cheers
Miro
P.S. Did I say that I'm loving this laptop
Moderator edit: No picture warning in subject line = no inline images. Also, please keep image ~50KB unless you post in the "Pictures of your Thinkpad" forum.





