Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
booq Vyper XXS.. any that have this sleev..??
booq Vyper XXS.. any that have this sleev..??
hi.. are about to buy booq Vyper XXS.. just wounder if anyone in out there know if its a good sleev and if X41 with the small battery fits in this sleev..
IBM ThinkPad X41 2525-63G
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro
Hi there.
If your referring to the sleeve that fits 12.1 inch notebook, I have it.
I have X31. The sleeve is a little big for my notebook, so that my X31 "rattles/moves" around the sleeve. It is not a perfect fit. I placed a small towel inside the sleeve to provide a better fit.
Other than that it seems to be ok. Let me know if you have specific question.
Scott.
If your referring to the sleeve that fits 12.1 inch notebook, I have it.
I have X31. The sleeve is a little big for my notebook, so that my X31 "rattles/moves" around the sleeve. It is not a perfect fit. I placed a small towel inside the sleeve to provide a better fit.
Other than that it seems to be ok. Let me know if you have specific question.
Scott.
X31 2885: Hitachi 80G 7200RPM, 2X512_2700 (1Gig), XP_SP3 (Primary)
X200 7454: 100G 7200, 1x2Gig, Vista Home Premium (upgrading to W7-32bit) (Secondary)
X200 7454: 100G 7200, 1x2Gig, Vista Home Premium (upgrading to W7-32bit) (Secondary)
thnx for the answer..
I don’t know if it’s the 12½”.. but on there homepage there is two sleeves that is meant for 12” laptop..
The XS with a dimension: 284x231x36mm
And The XSS: 277x218x30mm
This is the dimension in the laptop compartment, and the X41 with the small battery have the size: 268x211x23.9mm
so if all the info is correct the I will have around 9x7x6mm to “play with” so that means 4.5mm on the each side.. and 3.5mm front and back..
Do you have any picture..??
I don’t know if it’s the 12½”.. but on there homepage there is two sleeves that is meant for 12” laptop..
The XS with a dimension: 284x231x36mm
And The XSS: 277x218x30mm
This is the dimension in the laptop compartment, and the X41 with the small battery have the size: 268x211x23.9mm
so if all the info is correct the I will have around 9x7x6mm to “play with” so that means 4.5mm on the each side.. and 3.5mm front and back..
Do you have any picture..??
IBM ThinkPad X41 2525-63G
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I thought 4:3 T61 were supposed to have good hinges
by dcfbf » Mon Dec 01, 2025 5:42 pm » in ThinkPad T60/T61 Series - 5 Replies
- 7721 Views
-
Last post by ajkula66
Wed Dec 03, 2025 7:38 am
-
-
-
Have you seen the classic ThinkPad prices these days?
by dcfbf » Tue Dec 02, 2025 8:24 pm » in Off-Topic Stuff - 11 Replies
- 13269 Views
-
Last post by edik
Wed Apr 08, 2026 6:43 pm
-
-
-
Anyone still have a T50?
by Medessec » Mon Dec 15, 2025 12:59 pm » in 51nb and other modded Thinkpads - 3 Replies
- 6969 Views
-
Last post by dr_st
Tue Dec 16, 2025 4:06 am
-
-
-
Got a 600E, but I have some questions about it
by khozmos » Thu Jan 22, 2026 10:36 am » in ThinkPad Legacy Hardware - 3 Replies
- 4138 Views
-
Last post by khozmos
Thu Jan 22, 2026 4:46 pm
-
Who is online
Users browsing this forum: No registered users and 87 guests



