booq Vyper XXS.. any that have this sleev..??

X2/X3/X4x series specific matters only
Post Reply
Message
Author
.di
Posts: 32
Joined: Mon Aug 29, 2005 5:26 pm

booq Vyper XXS.. any that have this sleev..??

#1 Post by .di » Thu Oct 27, 2005 12:52 am

hi.. are about to buy booq Vyper XXS.. just wounder if anyone in out there know if its a good sleev and if X41 with the small battery fits in this sleev..
IBM ThinkPad X41 2525-63G
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro

cha4218
Posts: 44
Joined: Mon May 16, 2005 7:00 pm
Location: Palisades Park, NJ

#2 Post by cha4218 » Sat Oct 29, 2005 4:52 am

Hi there.
If your referring to the sleeve that fits 12.1 inch notebook, I have it.

I have X31. The sleeve is a little big for my notebook, so that my X31 "rattles/moves" around the sleeve. It is not a perfect fit. I placed a small towel inside the sleeve to provide a better fit.

Other than that it seems to be ok. Let me know if you have specific question.

Scott.
X31 2885: Hitachi 80G 7200RPM, 2X512_2700 (1Gig), XP_SP3 (Primary)
X200 7454: 100G 7200, 1x2Gig, Vista Home Premium (upgrading to W7-32bit) (Secondary)

.di
Posts: 32
Joined: Mon Aug 29, 2005 5:26 pm

#3 Post by .di » Sat Oct 29, 2005 5:16 am

thnx for the answer..

I don’t know if it’s the 12½”.. but on there homepage there is two sleeves that is meant for 12” laptop..

The XS with a dimension: 284x231x36mm
And The XSS: 277x218x30mm

This is the dimension in the laptop compartment, and the X41 with the small battery have the size: 268x211x23.9mm

so if all the info is correct the I will have around 9x7x6mm to “play with” so that means 4.5mm on the each side.. and 3.5mm front and back..

Do you have any picture..??
IBM ThinkPad X41 2525-63G
Pentium M 758 | 512MB RAM | 12.1" XGA | Hitachi 60GB 4800RPM HDD | WinXP Pro

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X2/X3/X4x Series incl. X41 Tablet”

Who is online

Users browsing this forum: No registered users and 1 guest