Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Access Connections and new wireless card
Access Connections and new wireless card
I know ive seen a thread about this somewhere but i cant find it for the life of me. I was experiencing alot of dropped connections and weak signal strength with my intel wireless card so i decided to swap it out for an atheros card. It was recognized immediately and is working fine but i cannot get AC to see the card. So i am relegated to allowing windows to handle the wireless networking. Anyone know how to get AC using the new card? ive tried uninstalling and reinstalling AC but no luck.
-
Thinkpad760XD
- Posts: 23
- Joined: Thu Nov 09, 2006 7:05 am
- Location: NY
Uninstall and reinstall the following:
1 - Access Connections and location profiles
2 - Power Manager
3 - HotKey features
4 - Wireless LAN drivers
You probably did not do the bolded items above, since it is counter intuitive that one should have to uninstall those items.
1 - Access Connections and location profiles
2 - Power Manager
3 - HotKey features
4 - Wireless LAN drivers
You probably did not do the bolded items above, since it is counter intuitive that one should have to uninstall those items.
Last edited by EOMtp on Thu Nov 16, 2006 5:52 pm, edited 1 time in total.
EOMtp,
Worked perfectly! Thanks it is much appreciated.
Trolle,
I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Worked perfectly! Thanks it is much appreciated.
Trolle,
I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Weez,
Thanks for the response. I will certainly consider upgrading the wireless card in my X60. Hopefully it will remove the problems with dropped connections and AC as well.
Maybe you could post the seller you used? I checked Ebay but there were quite a few sellers of Atheros cards and I am unsure which one is the correct model and the latest version.
Thanks for the response. I will certainly consider upgrading the wireless card in my X60. Hopefully it will remove the problems with dropped connections and AC as well.
Maybe you could post the seller you used? I checked Ebay but there were quite a few sellers of Atheros cards and I am unsure which one is the correct model and the latest version.
Seller was teckwave_store his email is sales@teckwave.com, you can ask him if he has any of these available. This was the listing for my card but i dont see it listed anymore. When i purchased mine it said he had 40 available
40Y7026 Lenovo ThinkPad 11a/b/g Wireless LAN Mini-PCI
40Y7026 Lenovo ThinkPad 11a/b/g Wireless LAN Mini-PCI
-
redburgundy
- Freshman Member
- Posts: 91
- Joined: Thu Apr 27, 2006 12:25 pm
That's consistent with what I found when I put in the Atheros card.Weez wrote: I waited to answer your question about the signal strength because i wanted to compare them in AC and not while allowing windows to manage the connection. The atheros signal strengths are way higher than the IBM was, I have 4 WAP's in my house and while sitting in my kitchen I used to get 80% for WAP1, 70% WAP2 and 30% for WAP3, WAP4 never was recognized (Basement WAP) Now I am getting 100% WAP1, 100% WAP2, 80% WAP3 and 60% WAP4. I am also seeing several neighbors WAP's that I never saw before.
Does anyone know what Atheros version the ThinkPad 11a/b/g Wireless LAN (product #40Y7026) is?
I can't seem to find it and wanted to make sure that I was buying the most up-to-date hardware.
I read a press release on Atheros' website that Lenovo was going to install Atheros’ AR5008E-3NX LAN, but this was announced 12 days ago and I doubt I can find or afford this latest version.
Can only seem to find 40Y7026.
I can't seem to find it and wanted to make sure that I was buying the most up-to-date hardware.
I read a press release on Atheros' website that Lenovo was going to install Atheros’ AR5008E-3NX LAN, but this was announced 12 days ago and I doubt I can find or afford this latest version.
Can only seem to find 40Y7026.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
FS: NOS Frankenpad T61p motherboard 44c3926 NEW 2011 date NVIDIA fx570m fits 14.1 and 15 4:3 t60, t61
by andre#4 » Fri Feb 06, 2026 1:58 pm » in Marketplace - Forum Members only - 1 Replies
- 4183 Views
-
Last post by andre#4
Mon Feb 09, 2026 9:34 pm
-
-
-
free: ThinkPad 760 memory card w/ ram
by PiZzA EnGiNeEr » Fri Nov 14, 2025 12:16 am » in Marketplace - Forum Members only - 3 Replies
- 7512 Views
-
Last post by RealBlackStuff
Mon Nov 17, 2025 12:29 pm
-
-
-
T14 Gen 1 AMD - problems with wwan card: whitelist?
by piripuz » Mon Nov 17, 2025 4:42 am » in Thinkpad T14/T15/T16 - 4 Replies
- 11590 Views
-
Last post by piripuz
Wed Nov 19, 2025 5:56 am
-
-
-
To SIM card or not to Sim
by ShellieACarlson » Tue Feb 03, 2026 9:09 am » in Thinkpad - General HARDWARE/SOFTWARE questions - 1 Replies
- 3087 Views
-
Last post by dr_st
Tue Feb 03, 2026 9:19 am
-
Who is online
Users browsing this forum: No registered users and 46 guests





