Homepage
Forum
Drivers
HMM
MTM
Feed
The back is one huge metal heatsink - probably not for the machine itself but to compensate for the heavy-industry environment it's built for:
On one side is the power button, some status indicators and some other jacks all blanked out:
One the other side, dual PC Card slots and a PS/2 port:
And on the bottom, many ports you'd find on a thinkpad - docking port, serial, parallel, FDD connector, PSU connector - but also manual screws for 12-24v DC direct connection:
It powers on with a 16Mb memory check and then shows this enticing screen:
Then shows a bunch of autorunning programs being loaded:
Then an OS/2 style window with various OS options:
And then it boots into the 'shop' software:
The LCD has vinegared up inside but it's still quite usable. Shame as I suspect there is nothing to be done for that. Although I will attempt to disassemble it to check for corrosive batteries, leaking caps, image the HDD / copy the software off the HDD and make a note of the LCD being used inside.
It's still fully working - it has sound, touchscreen works fine - I'm amazed - I thought it would show nothing or just flicker at me....
