Supervisory Password

T60/T61 series specific matters only
Post Reply
Message
Author
Truthfinder
Junior Member
Junior Member
Posts: 311
Joined: Sun Nov 12, 2006 12:24 am
Location: Jersey by the Sea

Supervisory Password

#1 Post by Truthfinder » Fri Jul 09, 2010 10:09 pm

Hello all:

I have disabled all the features to disable the bootup padlock on my T60, however, I still get the padlock and have to enter my password. Can anyone tell me what in the heck I'm doing wrong to get rid of this darn padlock? I set this up a long while ago and now I can't undo it.

Thanks, Steve
ThinkPad T-60 2623D7U, 4GB Kingston HyperX / ThinkPad T-60P 2008-83U , 4GB Kingston HyperX.
Running Windows 7 on both units. Dedicated ThinkPad user for about 18 years.

rkawakami
Admin
Admin
Posts: 10055
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:

Re: Supervisory Password

#2 Post by rkawakami » Fri Jul 09, 2010 11:04 pm

There's three possible passwords in the system. If you are getting prompted every time you turn the system on, then it's one of these:

- power on password
- hard drive password
- supervisor (aka, BIOS) password; only in one specific case

With the T60 I believe that there's three different icons present along with the padlock. The power-on password is represented by a squarish-looking symbol; a crude picture of a computer monitor. The hard drive password prompt has a cylinder, with a number 1 (for the first hard drive). The supervisor password has an outline of a person. On older systems, the supervisor password prompt is the same as the power-on. The only time that you will get the supervisor prompt without explicitly trying to access the BIOS is if the password has been set and then the backup battery dies (or is temporarily removed).

Once you have identified which password you are dealing with, to remove it you must supply the correct password in the "current" field and just "returns" for the new password. Double check the status of each password entry in the BIOS Security/Password menu. They will display "disabled" if the password has been removed and "enabled" if it's still in effect. I would also check the Fingerprint menu and see if there's something in there that's causing the problem.

ref: http://www-307.ibm.com/pc/support/site. ... MIGR-64884 (T60 BIOS simulator)
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

RealBlackStuff
Admin
Admin
Posts: 17517
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: Supervisory Password

#3 Post by RealBlackStuff » Sat Jul 10, 2010 6:50 am

You can also check this: http://www-307.ibm.com/pc/support/site. ... MIGR-59377

Another option: check if your CMOS battery still holds a charge, it may not 'save' the setting-changes.
Careful! A Power-On Password will turn into a Supervisor PW after CMOS removal, so make sure you know all the PWs.
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 6 guests