HD size after preloaded software?

T4x series specific matters only
Post Reply
Message
Author
Bobert
Posts: 9
Joined: Wed May 19, 2004 2:54 pm
Location: Atlanta, GA

HD size after preloaded software?

#1 Post by Bobert » Thu May 20, 2004 10:13 am

Does anyone know exactly or approximately how much space is allocated to preloaded software? I am curious to know how much of a 40/60/80 HD will actually be available to me when I receive the TP. I thought I read that the recovery feature stores an image in a hidden partition...that has to eat up quite a bit of space if it is true.

Also, does the preloaded allocation vary between T41/T42?

Thanks in advance!
Top
Skywing
Sophomore Member
Posts: 243
Joined: Fri May 07, 2004 12:29 pm

#2 Post by Skywing » Thu May 20, 2004 10:36 am

i think its about 7GB, i could be wrong
Top
Conmee
Junior Member
Junior Member
Posts: 417
Joined: Tue Apr 27, 2004 7:56 pm
Location: Reno, NV

#3 Post by Conmee » Thu May 20, 2004 1:38 pm

I see about 3.5GB for the factory restore... double the size, at minimum, if you enable Rapid Restore, which will consume additional space for backup and restore.
MacBook Pro 15" Retina Display / 2.6GHz Ci7 / 16GB DDR3/ 512GB SSD / Mac OS X 10.9.3
Top
Skywing
Sophomore Member
Posts: 243
Joined: Fri May 07, 2004 12:29 pm

#4 Post by Skywing » Thu May 20, 2004 2:06 pm

Conmee wrote:I see about 3.5GB for the factory restore... double the size, at minimum, if you enable Rapid Restore, which will consume additional space for backup and restore.
i guess 7GB is about right then
Top
n3il
Sophomore Member
Posts: 225
Joined: Thu Apr 15, 2004 2:25 am
Location: Scotland, UK.

#5 Post by n3il » Thu May 20, 2004 2:13 pm

On my R50p with preloaded software only, the "60Gb" drive was ~53Gb.

This is down to the HPA and also the fact that the drive has been formatted (NTFS)

HTH

Neil
Neil
R50p 1832-23G; 2GB RAM
Top
BillMorrow
*Senior* Admin
*Senior* Admin
Posts: 7153
Joined: Tue Apr 13, 2004 9:40 pm
Location: San Francisco -> Florida -> Georgia
Contact:
Contact BillMorrow

#6 Post by BillMorrow » Thu May 20, 2004 2:24 pm

when needed, i clone the HDD..
and recover all that space..
and an easy recovery if the HDD dies..

it IS a good idea for many but this one size solution does NOT fit all..! :)
Last edited by BillMorrow on Fri May 21, 2004 2:14 am, edited 1 time in total.
Bill Morrow, kept by parrots :parrot: & cockatoos
Sysop - forum.thinkpads.com

*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~
Top
Conmee
Junior Member
Junior Member
Posts: 417
Joined: Tue Apr 27, 2004 7:56 pm
Location: Reno, NV

#7 Post by Conmee » Thu May 20, 2004 3:06 pm

n3il wrote:On my R50p with preloaded software only, the "60Gb" drive was ~53Gb.

This is down to the HPA and also the fact that the drive has been formatted (NTFS)

HTH

Neil
Remember that when looking at the "Properties" of a drive in WinXP or via the System|Manage app, a 60GB drive will read "55.87GB" or so. That's without any hidden partitions or HPA. The actual byte size is 59,999,244,288 hence "60GB" drive designation.

So with a 3GB factory restore HPA, ~53GB is the correct reading... closer to ~50GB (as WinXP would display it) with HPA + Rapid Restore storage space factored in.
MacBook Pro 15" Retina Display / 2.6GHz Ci7 / 16GB DDR3/ 512GB SSD / Mac OS X 10.9.3
Top
Bobert
Posts: 9
Joined: Wed May 19, 2004 2:54 pm
Location: Atlanta, GA

#8 Post by Bobert » Fri May 21, 2004 9:18 am

Thanks!
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 9 guests