Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

T60 Ethernet Port?

T60/T61 Series
Post Reply
Message
Author
BruisedQuasar
Junior Member
Junior Member
Posts: 406
Joined: Sat Nov 05, 2005 8:12 am
Location: Ann Arbor, Michigan

T60 Ethernet Port?

#1 Post by BruisedQuasar » Mon May 03, 2010 5:17 pm

Recently gave away my T23 & picked up a nice T60. Question. This is my first experience with a Gig Ethernet. Is the port the same as previous ethernet ports? I think mine maybe worn, unless Gig Ethernet ports are slightly larger. A cable I used would move loose & cut my connection. I discovered the lever that locks the plug into ports was getting rather light in spring. When it broke off, I thought the plastic lever was the issue. I tried a short very high quality cable. It locks but does not make the snap sound I am used to hearing when I seat a cable plug in am ethernet port. It does snap and fit snugly in the ports of a never used Ethernet Switch Box.

The "new" cable does lock but there is more out movement when I gently pull on it than I am used to.

I tried a Linksys USB to Ethernet adapter that worked well for me in XP Pro & W2K PRO Systems but Vista Ultimate will not accept it. I cannot find a Vista driver @ Cisco that works.

So, I looked for a replacement internet card or a port. I found ports and cards for everything BUT ethernet.

Is Ethernet hardware and port soldered to the T60 (1.83 MHz) motherboard?

Does anyone know of a PC II or Express Card Ethernet adapter card that has a Vista (Utimate) driver that works?

--Bruised :help:

billp117
Senior Member
Senior Member
Posts: 945
Joined: Thu Dec 21, 2006 2:19 pm
Location: Kirkland, WA

Re: T60 Ethernet Port?

#2 Post by billp117 » Tue May 04, 2010 1:13 am

Billp117, Kirkland, WA

T410-SSD, X200, X100e, 2-T61, T60, 3-T43, T43p, TR451, X41t, X21, 701c

AIX
Senior Member
Senior Member
Posts: 503
Joined: Wed Oct 19, 2005 3:10 am
Location: Bucharest, Romania, EU

Re: T60 Ethernet Port?

#3 Post by AIX » Tue May 04, 2010 4:53 am

My advice is to try a STP cable instead - take a look here(shielded cat. 6 utp) - it snap very well in my T60's ethernet port (with clack sound), not like a normal (used and old) utp cat. 5 cable I use frequently (which is a little loose when plugged).
T480 · i7-8650U · 32GB RAM · 512GB SSD · FHD · NVIDIA MX150 · Fibocom L830-EB
T420s · i5-2520M · 12GB RAM · 480GB SSD · HD+ · HD3000 · F5521gw
Past: T430, T400, T60, T41, T22, 600X, 390X

BruisedQuasar
Junior Member
Junior Member
Posts: 406
Joined: Sat Nov 05, 2005 8:12 am
Location: Ann Arbor, Michigan

Re: T60 Ethernet Port?

#4 Post by BruisedQuasar » Tue May 04, 2010 9:20 am

Thank you Billp117 & AIX!! :bow:

AIX, I thought I read a few years ago that its best to use a different Ethernet cable type for GB Eth ports. The pic made what you opined crystal clear. Thank you.

Billp117, I checked out cards at Amazon, eBay, & Newegg until my eyes complained (I am visually impaired)! Each one listed had buyers who claimed the Vista drivers choked their system. I know buyer "reviews" are often useless but I also know I could spend a lot of bucks and headache time by just ignoring them. Most did not bother to say what O/S they have. I know XP Pro and W2K Pro auto load anything & Linux distros are amazingly superior to Windoz when it comes to auto hardware ID & install, which is why (I figure) MS pressures (forces?) MS computing cartel members to refuse to cooperate with Linux project groups.

I will look for info on the cards you found on eBay elsewhere (date of release and reviews) to see which ones actually do work with Vista. I thought MS incompatibility pranks would be off Vista and focused on Win7.

I thank both of you for your assistance.

--Bruised

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T60/T61 Series”

Who is online

Users browsing this forum: No registered users and 46 guests