Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

Lazarus T61

T60/T61 Series
Post Reply
Message
Author
Raidriar
Freshman Member
Posts: 113
Joined: Thu Dec 01, 2016 12:43 am
Location: Richmond, VA

Lazarus T61

#1 Post by Raidriar » Sat Sep 26, 2020 9:16 pm

I had a dead T61 with nvidia NVS 140M laying around. I was about to dump it into the recycling bin when I figured what the heck, let's see if it can be resurrected for fun.

Symptoms of my "dead" T61:
-Powers on
-No internal display (no backlight, black screen)
-No display over VGA
-Beeped when power button was held after system was powered on

Procedure:
1. Strip down and remove the motherboard
2. Soak the nvidia, intel northbridge, and intel southbridge chips with no-clean liquid flux.
3. Find a heat gun, crank it up on high, do a few passes around the board in a circular motion to preheat
4. Move the heat gun over the three BGAs, move in a circular motion as before, but slower as to focus more heat in the area. Do this for about 5 minutes
5. do a few more passes around the rest of the board, as to prevent warping
6. Let the board cool for about 20 minutes, then reassemble. Don't forget fresh paste on the CPU, GPU, and southbridge.
7. Turn it on, and see if it works!

In my case, T61 booted up without problems. I am really quite amazed this worked, though I don't expect it to be working for long. I took this opportunity to apply Highsun's 0.9V undervolted ASPM enabled BIOS to the T61. This was a fun quarantine project, maybe others with dead T61 can play roulette and see if they win!

Typed from my Lazarus T61
Thinkpads: 760XD, 600E, T23, T30, T43p, T61p
Alienwares: M17x R1, M17x R2, M18x R1, M18x R2, Alienware 18
Razers: Razer Blade Pro 2017 FHD

atagunov
Senior Member
Senior Member
Posts: 933
Joined: Thu Apr 02, 2020 3:11 pm
Location: London, UK

Re: Lazarus T61

#2 Post by atagunov » Sun Sep 27, 2020 12:45 pm

I actually suspect that as Luis Rossman once said the reason this works is because heating the chip up makes something inside the video chip work again, rather than because it fixes the connection between the chip and the motherboard.. Congrats on having it working again! Out of curiosity, which flux did you use? If that theory about fixing the inside of the chip rather than the outside is correct flux probably doesn't matter much but I'd still like to know.
X220, 2 *T520

Raidriar
Freshman Member
Posts: 113
Joined: Thu Dec 01, 2016 12:43 am
Location: Richmond, VA

Re: Lazarus T61

#3 Post by Raidriar » Sun Sep 27, 2020 1:52 pm

I used Kester 951.


I see tpfancontrol and GPUZ have two different temperature readings for the nvidia chip. GPUZ is 10C higher than TPfancontrol. I’m willing to believe the GPUZ reading more since this series of nvidia chips were evil and very inefficient
Thinkpads: 760XD, 600E, T23, T30, T43p, T61p
Alienwares: M17x R1, M17x R2, M18x R1, M18x R2, Alienware 18
Razers: Razer Blade Pro 2017 FHD

Droider
Sophomore Member
Posts: 159
Joined: Sun May 08, 2016 3:47 pm
Location: Istanbul

Re: Lazarus T61

#4 Post by Droider » Sun Sep 27, 2020 2:41 pm

They sold me a T61 with nvs 140m with the exact same situation which worked fine for 2 hours. I bought it for cheap and didnt mind the issue. But once it is dead, doesnt matter how many times it is resurrected, it will go weaker/crazier as much as it entered the lazarus pit.

Thanks for sharing your experience. Nice saying LAZARUS.

X1 Yoga Gen6, i5-1145G7/16GB/1TB 970EVO+, 14" UHD+ HDR
X230 Tablet, i7-3520M/16GB/512GB 860EVO, 12.5" HD, LED IPS
T61p, Core2Duo T9500/4GB/256GB 860EVO,14" SXGA+

Looking for the T60P 15" :!:

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T60/T61 Series”

Who is online

Users browsing this forum: No registered users and 243 guests